Bravo_R200_Tracfone_080105.fm Page 53 Friday, August 12, 2005 2:23 PM
S e t t i n g s
Allow numbers when phone locked
When phone lock is on, the only outgoing calls that can be made are to the emergency number programed into your phone (for example, 911) and the number stored in the Allowed number when phone locked location.
To store an allowed number, do the following:
1.In the standby mode, select Menu > Settings > Security settings >Access Codes. > Allowed number when phone locked.
2.Enter the lock code and select OK. See "Change lock code," p. 53.
3.Enter the phone number, and select OK.
Call an allowed phone number
In the standby mode, enter an allowed number and press the call key.
Change lock code
When you change your lock code, ensure that you store it in a safe place, away from your phone. Avoid entering access codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number.
The preset lock code is 1234. If you enter an incorrect lock code five times in a row, your phone will prompt you for the
1.In the standby mode, select Menu > Settings > Security settings >Access Codes. > Change lock code.
2.Enter the current (or default) lock code, and select OK.
3.Enter the new lock code (must be 4 characters in length), and select OK.
4.Reenter the new lock code for verification, and select OK.
Change security code
Your phone contains a security code of 5 digits. When you change your security code, make sure you store it in a safe place, away from your phone.
The preset security code is 12345. If you enter the wrong security code five times in succession, you will not be able to enter a code for 5 minutes, even if you power off the phone between incorrect entries.
53