Important safety instructions

Please take a moment to read these instructions before installing your TT50, as they will enable you to get the best performance and prolong the life of the unit. We advise you follow all instructions, heed all warnings and keep the instructions for future reference.

Positioning

Choose the installation location carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibration and excessive dust, cold or moisture. Do not place the unit on an unstable surface or shelf. The unit may fall, causing serious injury to a child or adult as well as serious damage to the product. Do not place other equipment on top of the unit. Do not install near any heat sources such as radiators, heat registers, stoves, or other unit (including amplifiers) that produce heat. No naked flame sources, such as lighted candles, should be placed on the unit.

Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the unit. When a cart is used, use caution when moving the cart/unit combination to avoid injury from tip-over. This unit must be installed on a sturdy, level surface. Do not place in a sealed area such as a bookcase or in a cabinet.

WARNING - To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. This unit must not be used near water or exposed to dripping or splashing water or other liquids. No objects filled with liquid, such as vases, shall be placed on the unit. In the event, switch off immediately, disconnect from the mains supply and contact your dealer for advice. The unit can be used in moderate climate.

Electronic audio components have a running in period of around a week (if used several hours per day). This will allow the new components to settle down, the sonic properties will improve over this time.

Grounding and polarisation

Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong are provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.

Power sources

The unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power- supply to your home, consult your product dealer or local Power Company.

Power cord protection

The unit must be installed in a manner that makes disconnection of the power supply from the mains socket outlet (or appliance connector from the rear of the unit) possible. Where the power supply is used as the disconnect device, the disconnect device shall remain readily operable. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the unit.

Be sure to insert each power cord securely. To prevent hum and noise, do not bundle interconnect leads with the power cord or speaker leads.

Overloading

Do not overload wall outlets or extension cord as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire hazard.

Lightning

For added protection during a thunderstorm, or when it is left unattended and unused for long period of time, unplug the unit from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit from lightning and power-line surges.

Cleaning

To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any cleaning fluids containing alcohol, ammonia or abrasives. Do not spray an aerosol at or near the unit.

Attachments

Do not use attachments not recommended by your dealer as they may cause harm to the unit. Only use the specified attachments/accessories with this unit.

Servicing

Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally, or has been dropped. These units are not user serviceable, never attempt to repair, disassemble or reconstruct the unit if there seems to be a problem. A serious electric shock could result if this precautionary measure is ignored. In the event of a problem or failure, please contact your dealer.

Contact the service department should any of these conditions occur:

-When the power-supply cord or plug is damaged.

-If liquid has been spilled, or objects have fallen into the unit.

-If the unit has been exposed to rain or water.

-If the unit does not operate normally after following the operation instructions, adjust only those controls that are covered by the operation instructions.

-If the unit has been dropped or damaged in any way.

-When the unit exhibits a distinct negative change in performance.

TT50 specifications

Cambridge Audio has long been a respected name in the realm of high-fidelity audio equipment, and their TT50 turntable exemplifies this commitment to quality and innovation. A perfect blend of modern technology and classic design, the TT50 delivers a remarkable vinyl listening experience that will appeal to both audiophiles and casual listeners.

One of the standout features of the Cambridge Audio TT50 is its belt-drive mechanism. This design significantly reduces motor vibrations, resulting in a purer sound output. The turntable utilizes a low-noise motor, which contributes to the exceptional audio clarity, allowing listeners to enjoy the warm and rich tones associated with vinyl records without unwanted interference.

The TT50 is equipped with a pre-mounted, high-quality moving magnet cartridge. This cartridge is designed to provide accurate tracking and reproduce sound with outstanding detail and dynamic range. Additionally, the adjustable tonearm allows for precise alignment and tracking, accommodating various record types and ensuring optimal performance across different vinyl genres.

Another notable characteristic of the TT50 is its user-friendly interface and ease of setup. With standard RCA outputs, it can easily connect to a variety of amplifiers or powered speakers. Whether you're an experienced vinyl collector or new to the format, the TT50 is designed to make your journey into vinyl as seamless as possible.

In terms of aesthetics, the Cambridge Audio TT50 boasts a sleek, minimalist design that will complement any home décor. The turntable features a robust plinth designed to minimize resonance, providing a stable platform for playback. The combination of high-quality materials and thoughtful design elements ensures durability and longevity.

The TT50 also embraces modern technology with features such as a USB connectivity option, enabling users to digitize their vinyl collection easily. This allows for a seamless integration of analog and digital formats, ensuring that classic records can be preserved and enjoyed in various modern ways.

Overall, the Cambridge Audio TT50 turntable embodies a perfect synthesis of tradition and innovation, offering exceptional sound quality, user-friendly features, and stylish design. It stands as an excellent choice for anyone looking to explore or deepen their appreciation for vinyl music. Whether for nostalgia or sheer audio pleasure, the TT50 is a fantastic entry point into the world of vinyl.