Cartridge downforce adjustment

Assembly/setup continued

Connection using phono stage

2. Carefully rotate the counterweight until the armtube balances out, i.e.

floats horizontally parallel to the surface of the turntable. The arm

should return to the balanced position if it is moved up or down. This

adjustment must be done carefully. Do not forget to remove the

TT50

cartridge protection cap if fitted.

Phono Stage

Amplifier

Connection using amplifier with built-in phono stage

3.Once the arm is correctly balanced return it to the rest. Hold the counterweight so it cannot rotate and your setting is not lost, and gently revolve the downforce scale ring only until the zero is in line with the white line. Check whether the arm still balances out.

L R

TT50

Amplifier with phono stage

7. Carefully remove the protective cover from the supplied cartridge.

4.Now rotate the whole counterweight and scale ring together counter clockwise (seen from the front) to adjust the downforce according to the cartridge manufacturer's recommendations. One mark on the scale represents 1 mN (0.1g) of downforce.

Note: The recommended downforce for the factory fitted cartridge is 20mN / 2.0g.

The supplied counterweight is suitable for cartridges weighing between 3.5 and 5.5g.

An alternative counterweight for cartridges weighing between 6 - 9g is available as an accessory part, contact your Cambridge Audio dealer if you need this part.

Before adjusting the downforce, first set the anti-skating adjustment to zero.

2 0.5

4 1 0

1.Gently push and turn the counterweight onto the armtube stub. Lower the armlift and position the cartridge in the space between arm rest and platter.

Anti-skating (bias) adjustment

The TT50 features a magnetic anti-skate which applies a non contact force to the arm to counter-act the natural force applied by the record as the stylus is forced towards the center of the spiralling groove.

The anti-skate adjustment has been designed so that it is matched to the tracking force adjustment (higher tracking force requires higher anti- skate) and should be set to the same numerical value.

Setting the correct anti-skate ensures that the average pressure on both sides of the stylus is equal for best stereo separation and tracking ability.

Turn the dial anti clockwise to apply magnetic anti-skate so that the metal pin indicates the same reading as the downforce setting previously set.

Note: The anti-skate for the supplied cartridge is 2.0g. This is not a critical setting and an accuracy of +/- 0.5g is usually quite sufficient.

2 0.5

4 1 0

Your turntable is now ready for use.

TT50 specifications

Cambridge Audio has long been a respected name in the realm of high-fidelity audio equipment, and their TT50 turntable exemplifies this commitment to quality and innovation. A perfect blend of modern technology and classic design, the TT50 delivers a remarkable vinyl listening experience that will appeal to both audiophiles and casual listeners.

One of the standout features of the Cambridge Audio TT50 is its belt-drive mechanism. This design significantly reduces motor vibrations, resulting in a purer sound output. The turntable utilizes a low-noise motor, which contributes to the exceptional audio clarity, allowing listeners to enjoy the warm and rich tones associated with vinyl records without unwanted interference.

The TT50 is equipped with a pre-mounted, high-quality moving magnet cartridge. This cartridge is designed to provide accurate tracking and reproduce sound with outstanding detail and dynamic range. Additionally, the adjustable tonearm allows for precise alignment and tracking, accommodating various record types and ensuring optimal performance across different vinyl genres.

Another notable characteristic of the TT50 is its user-friendly interface and ease of setup. With standard RCA outputs, it can easily connect to a variety of amplifiers or powered speakers. Whether you're an experienced vinyl collector or new to the format, the TT50 is designed to make your journey into vinyl as seamless as possible.

In terms of aesthetics, the Cambridge Audio TT50 boasts a sleek, minimalist design that will complement any home décor. The turntable features a robust plinth designed to minimize resonance, providing a stable platform for playback. The combination of high-quality materials and thoughtful design elements ensures durability and longevity.

The TT50 also embraces modern technology with features such as a USB connectivity option, enabling users to digitize their vinyl collection easily. This allows for a seamless integration of analog and digital formats, ensuring that classic records can be preserved and enjoyed in various modern ways.

Overall, the Cambridge Audio TT50 turntable embodies a perfect synthesis of tradition and innovation, offering exceptional sound quality, user-friendly features, and stylish design. It stands as an excellent choice for anyone looking to explore or deepen their appreciation for vinyl music. Whether for nostalgia or sheer audio pleasure, the TT50 is a fantastic entry point into the world of vinyl.