Motorola 6809505A83-A Battery use & safety, Service & repairs, Specific Absorption Rate Data

Page 6

the small print

battery use & safety

IMPORTANT: HANDLE AND STORE BATTERIES PROPERLY TO AVOID INJURY OR DAMAGE. Most battery issues arise from improper handling of batteries, and particularly from the continued use of damaged batteries.

DON’Ts

Don’t disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery.

Don’t let the phone or battery come in contact with water. Water can get into the phone’s circuits, leading to corrosion. If the phone and/or battery get wet, have them checked by your carrier or contact Motorola, even if they appear to be working properly.

Don’t allow the battery to touch metal objects. If metal objects, such as jewelry, stay in prolonged contact with the battery contact points, the battery could become very hot.

Don’t place your battery near a heat source. Excessive heat can damage the phone or the battery. High temperatures can cause the battery to swell, leak, or malfunction. Therefore:

Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven.

Avoid leaving your phone in your car in high temperatures.

DOs

Do avoid dropping the battery or phone. Dropping these items, especially on a hard surface, can potentially cause damage.

Do contact your service provider or Motorola if your phone or battery has been damaged from dropping or high temperatures.

IMPORTANT: USE MOTOROLA ORIGINAL PRODUCTS FOR QUALITY ASSURANCE AND SAFEGUARDS. To aid consumers in identifying authentic Motorola batteries from non-original or counterfeit batteries (that may not have adequate safety protection), Motorola provides holograms on its batteries. Consumers should confirm that any battery they purchase has a “Motorola Original” hologram.

Motorola recommends you always use Motorola-branded batteries and chargers. Motorola mobile devices are designed to work with Motorola batteries. If you see a message on your display such as Invalid Battery or Unable to Charge, take the following steps:

Remove the battery and inspect it to confirm that it has a “Motorola Original” hologram;

If there is no hologram, the battery is not a Motorola battery;

If there is a hologram, replace the battery and retry charging it;

If the message remains, contact a Motorola Authorized Service Center.

Important: Motorola’s warranty does not cover damage to the phone caused by non-Motorola batteries and/or chargers.

Warning: Use of a non-Motorola battery or charger may present a risk of fire, explosion, leakage, or other hazard.

PROPER AND SAFE BATTERY DISPOSAL AND RECYCLING

Proper battery disposal is not only important for safety, it benefits the environment. Consumers may recycle their used batteries in many retail or service provider locations. Additional information on proper disposal and recycling may be found on the Web:

www.motorola.com/recycling

www.rbrc.org/call2recycle/ (in English only)

Disposal: Promptly dispose of used batteries in accordance with local regulations. Contact your local recycling center or national recycling organizations for more information on how to dispose of batteries. Warning: Never dispose of batteries in a fire because they may explode.

service & repairs

If you have questions or need assistance, we're here to help.

Go to www.motorola.com/support, where you can select from a number of customer care options. You can also contact the Motorola Customer Support Center at

1-800-331-6456 (United States), 1-888-390-6456 (TTY/TDD United States for hearing impaired), or 1-800-461-4575 (Canada).

Specific Absorption Rate Data

SAR Data

This model wireless phone meets the government’s requirements for exposure to radio waves.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government and by the Canadian regulatory authorities. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic

and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age or health.

The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and by the Canadian regulatory authorities is 1.6 W/kg.1 Tests for SAR are conducted using standard operating positions accepted by the FCC and by Industry Canada with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output.

Before a phone model is available for sale to the public in the U.S. and Canada, it must be tested and certified to the FCC and Industry Canada that it does not exceed the limit established by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) reported to the FCC and available for review by Industry Canada. The highest SAR value for this model phone when tested for use at the ear is 1.32 W/kg, and when worn on the body, as described in this user guide, is 0.8 W/kg. The SAR value for this product in its data transmission mode (body-worn use) is 0.31 W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and regulatory requirements).2

While there may be differences between the SAR levels of various phones and at various positions, they all meet the governmental requirements for safe exposure. Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines.

Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site:

http://www.phonefacts.net

or the Canadian Wireless Telecommunications Association (CWTA) Web site:

http://www.cwta.ca

1.In the United States and Canada, the SAR limit for mobile phones used by the public is

1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

2The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.

European Union Directives Conformance Statement

Hereby,EU Confo mance Motorola declares that this product is in compliance with:

The essential requirements and other relevant provisions of Directive 1999/5/EC

All other relevant EU Directives

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0168

 

 

 

Approval

 

 

 

 

 

 

Product

 

 

 

 

 

 

Number

 

 

 

 

 

 

 

 

 

 

 

 

 

The above gives an example of a typical Product Approval Number.

You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the Product Approval Number from your product’s label in the “Search” bar on the Web site.

OPEN SOURCE SOFTWARE INFORMATION

ForOSS Informationinstructions on how to obtain a copy of any source code being made publicly available by Motorola related to software used in this Motorola mobile device you may send your request in writing to:

MOTOROLA, INC.

OSS Management

600 North US Hwy 45

Libertyville, IL 60048

USA

The Motorola website opensource.motorola.com also contains information regarding Motorola’s use of open source.

Motorola has created the opensource.motorola.com to serve as a portal for interaction with the software community-at-large.

To view additional information regarding licenses, acknowledgments and required copyright notices for open source packages used in this Motorola mobile device, please select “Legal Notices” from Phone Settings.

Image 6
Contents Motorola VA76r Turn phone on & off Menu navigationHome screen shortcuts End a call Make a callAnswer a call Redial a numberNative music player Play musicRead & reply to a message in the external display To control the music player, pressRogers Music Player Create and play a playlistSend a message To create a playlist on your phoneSpecific Absorption Rate Data Battery use & safetyService & repairs European Union Directives Conformance StatementSafety and General Information Industry Canada Notice to Users Motorola Limited Warranty for the United States and CanadaUse and Care FCC Notice to UsersProduct Registration Hearing Aid Compatibility with Mobile PhonesInformation from the World Health Organization Export Law AssurancesSmart Practices While Driving United StatesSoftware Copyright Notice

6809505A83-A specifications

The Motorola 6809505A83-A is a powerful microprocessor that has left its mark in the development of computing technology. Introduced as part of the renowned Motorola 68000 series, this microprocessor embodies a blend of advanced features and robust performance, making it a favored choice for various applications in the late 20th century.

One of the most prominent characteristics of the Motorola 6809505A83-A is its architecture. Built on a 32-bit architecture, this processor enables efficient data handling and processing capabilities. With its enhanced instruction set, the 6809505A83-A allows programmers to execute complex instructions directly, improving the overall efficiency of applications. This feature is especially beneficial for graphical computations and real-time processing tasks.

The Motorola 6809505A83-A also boasts a clock speed that can reach up to 25 MHz, facilitating rapid data processing and execution of instructions. The capable performance of this microprocessor is further enhanced by its support for multitasking and efficient memory management, making it ideal for operating systems and software that require a stable environment for simultaneous processes.

In terms of technology, the Motorola 6809505A83-A integrates advanced semiconductor processes, ensuring low power consumption and heat generation, a significant factor during its peak use in various computing devices. It features on-chip caches, which help to improve access speeds and overall system performance, allowing the processor to retrieve and store frequently used data without lengthy delay.

Another defining aspect of the Motorola 6809505A83-A is its versatility. It has been utilized in a variety of devices, ranging from early personal computers to gaming systems and embedded applications. This adaptability has contributed to its legacy, cementing its status as a staple in the evolution of microprocessor technology.

Moreover, the ability to interface with other components and peripherals is crucial in evaluating microprocessor capabilities. The 6809505A83-A supports various bus architectures, facilitating connections with external memory and input/output devices, a key component in modern computing systems.

In conclusion, the Motorola 6809505A83-A stands out in the history of microprocessors thanks to its impressive features, including its robust 32-bit architecture, multitasking support, and efficient memory management. With its adaptability and remarkable performance, the 6809505A83-A continues to be a symbol of innovation in the ever-evolving landscape of computing technology. Its impact resonates even today, reminding us of the foundational role that such processors have played in shaping the digital world.