American Audio POWERDRIVE22.pdf Headshell Locking Nut, Shaped Tone Arm, Tonearm Lift Adjust Screw

CONTROLS AND FUNCTIONS

	19	20	21	22	23	24	25	26	27
19.	Stylus Headshell -		The included headshell is used to connect your stylus
			with the tone arm.
20.	Headshell Locking Nut -		After attaching the headshell to the tonearm, this
			locking nut will securely hold the headshell to the
			tonearm.
21.	S-Shaped Tone Arm -		The tonearm is the mechanism that holds the head-
			shell and stylus allowing it to glide across a record.
22.	Tonearm Lift Adjust Screw -		This screw is used to adjust the clearance between
			the stylus and a record. The stylus clearance is set
			at the factory to be between 8~13mm. Adjustments to
			the tonearm clearance should only be made if
			necessary.

23.Tonearm Assembly Height Control - This adjustment is used to control the overall height of the tonearm assembly. The tonearm should always be perfectly parallel to the platter.

24.	Tonearm Clamp and Rest -	Use this rest to safely hold the tonearm in position
		during non use and transportation.
25.	Tonearm Lever -	This lever is used to safely elevates the tone arm
		above a record surface without endangering a
		records surface.
26. Anti-Skate Control -		The anti-skate applies inward force to the tonearm to
		prevent outward skipping across the record due to the
		centrifugal force cause by platter rotation. The anti-
		skate value should be equally to that of the stylus
		counterweight pressure (see counterweight 27).
27.	Counterweight -	The counterweight adjustment applies the proper
		downward pressure on the stylus.

©American Audio® - www.americandj.com - Power Drive 2.2™ Instruction Manual Page 16