RCA RTS202 Connecting the subwoofer, Other connection options, Using the wall mount bracket

	• If your television is a high
	definition television with an HDMI
	input, we highly recommend you
	use use the unit’s HDMI output to get
	the highest possible video resolution.
EN	• If your television does not have HDMI
	input but does support Progressive
	Scan, we recommend you use the

Connecting the subwoofer

Press down the tab to open the terminal and insert the subwoofer speaker wire. Release the tab to lock wire in the terminal.

Other connection options

There are several ways in which you can incorporate your unit into an Audio-Video system. This depends on the sockets and other appliances you have. Sound and image quality depend to a large extent on the types of connections used.

1. Coaxial Digital Audio Input

(not supplied), if you so desire. Simply use an RCA cable to connect a powered subwoofer to the SUBWOOFER AUDIO OUT jack. If you connect another powered subwoofer, you must disconnect the supplied subwoofer speaker to avoid interference.

EN

unit’s progressive scan output. Set the

Progressive Scan option in the Video

menu to On.

•If one of the devices is not working, check that all the cables have been inserted properly into the jacks.

•If your component has only one input for audio (mono), connect it to the left (white L/Mono) audio jack on the

TV and don’t connect the right audio part of the cable.

Method 2 (good)

Component video jacks (Pr, Pb, Y)

•The component video jacks are color-coded green, blue and red.

•Additional component video cables (not supplied) are required to provide best picture quality. They are usually color- coded green, blue and red.

•Connect the component video OUT jacks on the unit to the component video IN jacks on your TV so the video content goes from the unit to the screen.

Positioning the subwoofer

A subwoofer is designed to reproduce powerful low bass effects (explosions, the rumble of spaceships, etc.).

It can be placed either vertically or horizontally. For best effects, allow at least two inches of clear space over the speaker driver and the port hole.

Use of Rubber Pads

Attach the included rubber pads to the subwoofer to avoid mechanical vibration noise, especially when placing the subwoofer on a hard surface. Attached the rubber pads to the corners of the subwoofer for maximum stability.

The coaxial digital audio input is compatible with Dolby Digital (Surround Sound) and PCM (Digital Stereo) signals when compatible components are connected. Typical compatible devices include HDTVs, DVD players, Cable or Satellite set top boxes.

2. Subwoofer Audio Out

For your convenience, this product is equipped with a subwoofer preamp output, allowing you to connect an optional powered subwoofer

Using the wall mount bracket

Use the wall mounting hardwares (supplied) to secure the brackets into your Sound Bar.

Installing the Sound Bar to the wall

Method 3 (basic)

Composite video jack (yellow)

•	The basic video jack is color-coded
	yellow.
•	Video cable (yellow) for the connection
	for good picture quality.

Use the 1:1 Wall Mount Template (supplied) to drill holes in the wall. If attaching to a wall constructed of drywall and wooden studs, you must position the Template to ensure the drill holes align with the centers of the wooden studs in the wall.

If your wall is of drywall and stud construction, we recommend you use the following hardware (not included):

a. 2 pcs. woodscrews, size #8x2” b. 2 pcs. washers, size #8

• Connect the video OUT jack on the unit to

the IN jack on your TV so the video content

goes from the unit to the screen.

4

Note: It is not recommended to place the subwoofer near

the TV set.

• We recommend that Wall Mounting be carried out by a professional. Additional or alternative parts may be needed for certain type of wall constructions.

•Before hanging to the wall, please make all AV connections.

wall

1:1 Wall Mount Template

drill here Washer

Wood screw

5