RCA RTS202 user manual Surround Sound Effects, Additional Information, Audio Setup, Video Setup

Audio Setup

You can adapt your unit to other equipment and access specific functions with the Audio Setup menu.

	1.	Select the Audio Setup icon in the main
		menu using the left/right arrow buttons.
EN	2. Select an option using the up/down arrow
		buttons. Press the right arrow to move to

the option’s choices.

Video

Progressive Function provides high quality pictures with less flickering. Turn on Progressive Scan if you used the Component Video jacks of the unit to connect a TV or monitor compatible with a progressive scan signal.

Select P-Scan YPbPr and press OK to activate Progressive Scan.

TV Type

Depending on the format of the DVD disc, you can choose the picture format (aspect ratio) best suited to the format of your TV screen:

•	4:3 PS: reproduces a 4:3 picture without
	distortion.
•	4:3 LB: gives best reproduction of pictures
	recorded in this format (i.e. with horizontal
	bands at the top and bottom of the screen)
	or in 16:9.
•	16:9 (widescreen): reproduces 16:9 format

Surround Sound Effects

Dolby Digital

Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can reproduce from one to 5.1 discrete channels of excellent quality audio.

The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-channel listening.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

Dolby Virtual Speaker

This unit is equipped with Dolby ® Virtual Speaker Technology. This feature simulates a highly realistic 5.1-speaker surround sound listening environment without the need EN for rear surround speakers. Combined with Dolby ® Pro Logic II processing and Dolby Digital technology, this unit delivers a virtual surround listening experience from any high- quality audio source.

Dynamic Range

You can select the dynamic range as follow:

Full, 6/8, 4/8, 2/8 or off

•When a dynamic range is set, volume may be low.

Test Tone

This function is used to test the speakers level.

Select Test Tone, press OK to start, a short noise comes successively from each speaker (Front-Left, Center, Front-Right & Subwoofer). Press OK to exit.

Video Setup

1.Select the Video icon in the main menu using the left/right arrow buttons.

2.Select a menu option using the up/down arrow buttons and press OK.

16

films in full on a 16x9 screen.

Brightness

This option lets you adjust the video brightness level on a scale of 0 to 12, with 12 being the brightest.

Contrast

This option lets you to sharpen the picture quality.

Hue

This option lets you adjust the hue of the picture.

Saturation

This option lets you adjust the color saturation of the picture.

IMPORTANT!

Once Progressive Scan has been activated, an image will only be visible on a progressive scan TV or monitor. If you choose this option and you do not have a progressive scan TV or monitor, you may get a picture with incorrect color or no color.

Additional Information

Troubleshooting

The unit does not switch on.

•Make sure it is plugged in.

•Press the ON•OFF button on the remote

control or the ON/STANDBY button on the front of the unit.

The device switches off spontaneously.

•The device switches off automatically when it is in STOP mode for more than 30 minutes without any user intervention. Switch it on again.

•It might be impossible to read the disc.

•Insert the disc with the printed side facing up.

•Check that the disc can actually be played by this device.

•Check that the disc’s regional code matches the unit’s regional code. This unit’s regional code is 1.

•Clean the disc.

There is no picture.

•Check you have switched on the TV set.

•Check the connections.

•Select the AV input assigned to the unit

on the TV.

The picture is of poor quality (with snow or lines).

• Check the connections.

There is no sound or the sound is of poor quality.

•Check the connections.

•Make sure the MUTE function is not on.

I can’t find my file in the JPEG listing.

•Make sure the filename is valid.

The remote control does not work or works only intermittently.

•Check that batteries are inserted or change them.

•Aim the remote control at the unit. The infrared beam must not be blocked or interrupted.

•Check that the remote control is configured

to control the device you are trying to operate with it.

The subtitles do not appear.

•Check that the DVD disc provides subtitles.

•Refer to the section on how to display subtitles.

The disc menu language is not the correct one.

•The disc menu language has not been set up.

•The language of your choice is not available on the disc.

You have forgotten your password (Parental control).

• Use the super password: 9688. 17