Settings
GPRS settings | Menu- |
GPRS(General Packet Radio Service) is a technology that allows mobile phones to be used for sending and receiving data over the mobile network. GPRS is a data bearer that enables wireless access to data network such as the Internet.
Before you can use GPRS technology
-You need to subscribe to the GPRS service. For availability and subscription to GPRS service, contact your network operator or service provider.
-You need to save the GPRS settings for the applications used over GPRS.
Power on | (Menu- | |
If you select Power on and you are in a network that supports |
| |
GPRS, the phone registers to the GPRS network and sending short messages will be done via GPRS. Also, starting an active packet data connection, for example, to send and receive
When needed | (Menu- |
If you select When needed, the phone will use a GPRS connection only if you start an application or action that needs it. The GPRS connection is closed after it is no longer required by any application.
Note If there is no GPRS coverage and you have chosen Automatic, the phone will periodically try to establish a connection.
Reset settings | Menu- |
You can reset your phone to its default configuration. To do so, proceed, as follows.
1.Select the Reset settings menu option.
2.Enter the
Note The security code is preset to 0000.
To change this, refer to page 86.
C1200 User Guide 88
Tools
Press the menu key ( | ) and select Tools using the navigation |
keys. |
|
CalculatorMenu- 
-1
Using this feature, you can use the phone as a calculator. The calculator provides the basic arithmetic functions: addition, subtraction, multiplication and division. (You can enter numbers up to the second decimal place).
Using the Calculator
1.Enter the first number using the numeric keys.
2.Press the corresponding navigation key to select a mathematical function.
Note To erase any mistakes or clear the display, press the 
key.
To include a decimal point, press the 
key.
To include a minus sign, press the 
key.
3.To calculate the result, press the left soft key [Result] or OK key.
4.After calculation, press the left soft key [Reset] to return to the menu.
Unit converter | Menu- |
This converts any measurement from one unit to another.
There are 4 types that can be converted into units: Length, Area, Weight and Volume.
1.Select one of four unit types by pressing the left soft key [Unit].
2.Move to the current unit section by pressing the down navigation key.
3.Select the unit you want to convert using the left/right navigation keys.
4.Move to the Convert unit section by pressing the down navigation key.
C1200 User Guide 89