Getting started 
Disconnecting the adapter
1.When charging is finished, the moving bars of the battery icon stop and ‘Full’ is displayed on the screen.
2.Unplug the adapter from the power outlet. Disconnect the adapter from the phone by pressing the grey tabs on both sides of the connector and pull the connector out.
Note • Ensure the battery is fully charged before first using the phone.
•Do not remove the battery or SIM card while charging.
•In the case the battery is not properly charged, please turn the phone off and on using the power key, then recharge the battery. After detaching and reattaching the battery, please recharge the battery.
Getting started 
Turning your phone on and off
Turning your phone ON
1.Install a battery to the handset and connect the phone to an external power source such as the travel adapter, cigarette lighter adapter or
2.Press 
for a few seconds until the LCD screen is turned on.
3.Depending on the status of the PIN code request setting you may need to enter your PIN code.
Notice Like any other radio devices, avoid any unnecessary contact with the antenna while your phone is on.
Turning your phone OFF
1.Press 
for a few seconds until the LCD screen is turned off.
C1200 User Guide 22 | C1200 User Guide 23 |
|
|