Engineering Data - HRV | Model RNC200 |
|
|
THERMALLY CONDUCTIVE, PATENTED ALUMINUM CORE
The
It is easily removed for cleaning or service.
MOTORS AND BLOWERS
Each air stream has one centrifugal blower driven by a common PSC motor. 2 speed fan operation.
FILTERS
Washable air filters in exhaust and supply air streams.
MOUNTING THE HRV
Four threaded inserts at corners of case designed to accept four reinforced polyester straps that are supplied with the unit.
DEFROST
Recirculating damper defrost system.
CASE
Twenty gauge prepainted galvanized steel (G60) for superior corrosion resistance. Insulated to prevent
exterior condensation. Drain connections | two - 1/2" (12mm) OD. |
WEIGHT 71 lbs. (32.5 kg) | SHIPPING WEIGHT 73 lbs. (33.5 kg) |
CONTROLS - HRV System Control
HRV defaults to LOW SPEED when plugged in. HIGH SPEED option is accessible by connecting remote controls to designated terminals inside electrical box of HRV.
Standard LOW SPEED SETTING can be increased to medium low.
Off (Standby)/Low or OFF/HIGH speed operation is also available.
OPTIONAL MAIN CONTROLS (only one main control can be installed on the system)
Dehumidistat Ventilation Control - Dehumidistat Dial, ON/OFF Switch and LOW/HIGH | |
| Switch (3 wire) 20 gauge wire (min.) 100' length (max.) |
20/40 ON/OFF Dehumidistat - Dehumidistat Dial, ON/OFF Switch and 20/40 Switch. | |
| The 20/40 Switch will toggle from continuous low speed ventilation to intermittent low |
| speed ventilation of 20 minutes fan ON and 40 minutes fan OFF. (4 wire) 20 gauge wire |
| (min.) 100' length (max.) |
Recirculation Control - Dehumidistat Dial, ON/OFF Switch and Recirculation Switch. | |
| The Recirculation Switch will toggle from continuous low speed ventilation to continuous |
| low speed recirculation. (4 wire) 20 gauge wire (min.) 100' length (max.) |
Remote Dehumidistat - Dehumidistat Dial only. (2 wire) 20 gauge wire (min.) 100' length | |
| (max.) |
OPTIONAL TIMERS | |
20 Minute Fan Timer - initiates high speed ventilation for 20 minutes. (3 wire) 20 gauge | |
| wire (min.) 100’ length |
Digital Electronic Timer- initiates high speed ventilation for 20, 40 or 60 minutes, (3 | |
| wire) 20 gauge wire (min.) 100' length |
60 Minute Crank Timer - initiates high speed ventilation for up to 60 minutes, (2 wire) | |
| 20 gauge wire (min.) 100' length (max.) |
WARRANTY
Units carry a lifetime warranty on the heat recovery core and a 5 year replacement parts warranty.
Performance (HVI certified)
Net supply air flow in cfm (L/s) against external static pressure
E.S.P |
|
|
(external static pressure) | [cfm (L/s)] | |
@ 0.1" (25 Pa) | 207 | (97) |
@ 0.2" (50 Pa) | 200 | (94) |
@ 0.3" (75 Pa) | 184 | (87) |
@ 0.4" (100 Pa) | 171 | (80) |
@ 0.5" (125 Pa) | 152 | (71) |
@ 0.6" (150 Pa) | 130 | (61) |
@ 0.7" (175 Pa) | 116 | (55) |
@ 0.8" (200 Pa) | 86 | (40) |
Max. Temperature Recovery | 74% | |
|
|
|
Sensible Effectiveness |
|
|
@ 66 cfm (31 L/s) | 32°F (0°C) | 74% |
*Sensible Efficiency |
|
|
@ 66 cfm (31 L/s) | 32°F (0°C) | 64% |
*Sensible Efficiency |
|
|
@ 109 cfm (51 L/s) | 62% | |
|
|
|
VAC @ 60HZ |
| 120 |
|
|
|
WATTS / Low speed. |
| 87 |
|
|
|
WATTS / High speed |
| 164 |
Amp rating |
| 1.4 |
*Sensible Efficiency – thermal **Latent Efficiency – moisture Note: Effectiveness - based on temp. differential between the 2 airstreams Efficiency – takes into account all power inputs
| 220 |
|
|
|
|
| 3 - High Speed |
| ||
| 200 | 3 |
|
|
|
| *2 - Medium Low Speed | |||
|
|
|
|
|
| *1 - Low speed |
| |||
| 180 |
|
|
|
|
| * Manufacturers Data |
| ||
|
|
|
|
|
|
|
| |||
(cfm) | 160 |
|
|
|
|
|
|
|
|
|
140 |
|
|
|
|
|
|
|
|
| |
Flow |
|
|
|
|
|
|
|
|
| |
120 |
|
|
|
|
|
|
|
|
| |
Air | 2 |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
| 100 |
|
|
|
|
|
|
|
|
|
| 80 | 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| 60 |
|
|
|
|
|
|
|
|
|
| 40 |
|
|
|
|
|
|
|
|
|
| 0 | 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 |
Static Pressure (in w.g.)
All units conform to CSA and UL standards
Dimensions RNC200
FRESH AIR | STALE AIR | |
FROM OUTSIDE | ||
FROM INSIDE | ||
|
inches (mm)
RECIRCULATING 
DEFROST 
DAMPER
FILTERS
*NOTE: Front clearance
CORE | BLOWERS | |
MOTOR | ||
| ||
STALE AIR | FRESH AIR | |
TO OUTSIDE | ||
TO INSIDE | ||
| ||
| 33 5/8" |
19" (483 mm)
CONDENSATE DRAINS | (850 mm) BALANCING DAMPER |
of 25 inches (635 mm)
is recommended for servicing unit.
*All Duct Connections 6" (150 mm)
143/4"
(375 mm)
Date: _______________________________________________ | Contractor: __________________________________________ |
Tag: __________________________Qty:__________________ | Supplier: ____________________________________________ |
Project: _____________________________________________ | Quote#: _____________________________________________ |
Engineer:____________________________________________ | Submitted by: ________________________________________ |
6 | |
|
