Engineering Data - HRV | Model RNC120D |
|
|
Option 1 - Horizontal Duct Configuration Dimensions inches
STALE | FRESH AIR |
AIR TO | FROM |
OUTSIDE | OUTSIDE |
22” (559 mm)
25 1/8”
(637 mm)
BOTTOM VIEW FOR HORIZONTAL MOUNT SERVICE CLEARANCE FROM BOTTOM OF UNIT IS MINIMUM 3’0”
SIDE VIEW FOR HORIZONTAL MOUNT
HANGING STRAPS
STALE AIR
FROM BUILDING
FRESH AIR
TO BUILDING
STALE AIR |
| |
TO OUTSIDE |
| |
| FRESH AIR | |
FRESH AIR | TO BUILDING | |
| ||
FROM OUTSIDE |
| |
| STALE AIR | |
ALL DUCT COLLARS | FROM BUILDING | |
ACCESS DOOR | ||
ARE 5” DIAMETER |
Connect drain hose to spout located in door.
Option 2 - Vertical Duct Configuration Dimensions inches
STALE | FRESH AIR |
AIR TO | FROM |
OUTSIDE | OUTSIDE |
22” (559 mm)
25 1/8”
(637 mm)
SIDE VIEW FOR VERTICAL MOUNT SERVICE CLEARANCE FROM BOTTOM OF UNIT IS MINIMUM 3’0”
STALE AIR
HANGING STRAPS
TO OUTSIDE
STALE AIR
FROM BUILDING
FRESH AIR
TO BUILDING
FRESH AIR FROM OUTSIDE
STALE AIR
FROM BUILDING
ALL DUCT COLLARS ARE 5” (127 mm) DIAMETER
ACCESS DOOR
“L” BRACKETS
(not included)
May be installed if wall mounting is desired for the vertical installation.
FRESH AIR
TO BUILDING
TOP VIEW FOR VERTICAL MOUNT
Connect drain hose to the two field installed spouts located on the bottom of the unit.
The HRV can be installed horizontally or vertically as illustrated on the following pages. The unit should be suspended using the provided hanging straps. The unit must be level for proper
condensate drainage.
Sufficient clearance below the access door is required for servicing the air filters and core. A minimum of 25" (635mm) clearance is recommended so the door can be removed. Four PVC reinforced polyester hanging straps are provided for hanging the HRV.
11
