Suspending the RNC120D
Horizontal Installation
DETAIL
Using full length hanger straps is recommended for vibration control, but can be shorter if required.
ATTENTION
The unit must be mounted level for proper drainage of the condensate pans.
JOIST FASTENERS (not supplied)
STRAPS AND SCREWS (supplied)
Vertical Installation
Wall Mounting the HRV
Suspending the RNC120D
The hanging straps should be attached to the unit at the top end corners (mounting screws are already located on the HRV case). Securely fasten the other end of the straps to the ceiling making sure the UNIT IS LEVEL. The straps are designed to reduce the possibility of noise, resonance or harmonics; therefore using the full length of the strap between the HRV and the floor joists is recommended.
"L" BRACKETS (not included) may be installed if wall mounting is desired for the vertical installation.
It is important to isolate the "L" BRACKET from the attached surface to minimize vibration.
Use the hanging strap hardware to attache the brackets. Do not drill additional holes in the HRV.
14
