Chapter 4 Installing Virtual Network Data Server
Verifying the Virtual Network Data Server Installation
Step 15 Click Next.
The installer prompts you for the path to use for the Virtual Network Data Server temp directory.
Step 16 Type a temp directory path in the panel’s path field or use the file browser to select a path. The path you choose cannot contain embedded spaces.
Note The temp directory holds temporary working files for the product. The path you specify is the full path to this directory.
Step 17 Click Next.
The installer prompts you for the path to use for the Virtual Network Data Server archive directory.
Step 18 Type an archive directory path in the panel’s Path field or use the file browser to select a path. The path you choose cannot contain embedded spaces.
Note The archive directory holds collected device configuration files that have been archived by the product. The path you specify is the full path to this directory.
Step 19 Click Next. An Installation Progress panel shows status messages as Virtual Network Data Server installation progresses. Installation normally finishes in several minutes. When the installation is finished, an Install Complete panel appears.
Note The installer checks the version of the Oracle Toplink files that you chose in Step 10. If the wrong version files were selected, an error dialog box appears. Click OK to continue. Before operating Virtual Network Data Server, you must locate the correct version of the required Toplink files and copy them to the <install dir>\ext directory.
Step 20 Click Done to exit the installer.
Note Before you can use Virtual Network Data Server, you must first install a Virtual Network Data Server license as described in the “Adding a License: Workflow Description” section on page
For additional information about licensing, refer to the following sections of the product documentation:
•Virtual Network Data Server User Guide > Administration chapter > Product Licensing section
•Administrator Guide (in Design and Analysis documentation) > License Manager
•Administrator Guide (in Design and Analysis documentation) > License Server
Verifying the Virtual Network Data Server Installation
After Oracle installation is complete, configured, and verified, verify that Virtual Network Data Server is installed correctly.
Installation Guide for Cisco Network Planning Solution
| ||
|
