Operation

	CD	PHONO	AM	TUNING DOWN

TAPE		FM	TUNING

			MODE	TUNING UP
MONITOR

AUX

VOLUME

LOUDNESS

				BALANCE
POWER	PHONES SPEAKERS	FM MODE	PRESET	TREBLE
	A/B		SCAN
			MEMORY	BASS
			MEMORY

Warning: To prevent possible hearing loss, turn VOLUME to MIN before you turn on the receiver or change the program source. After you turn on the receiver or change the program source, adjust VOLUME to a comfortable listening level.

You can use the supplied remote control by pointing it at the receiver’s front panel and pressing the desired button(s). Many buttons on the remote control work the same as buttons on the receiver’s front panel. Use these buttons exactly as you would use the corresponding buttons on the receiver.

1.Press POWER to turn on the receiver. It takes about 5 seconds to hear sound.

2.Select the speakers. An indicator lights next to the A and/or B to show which speakers are on.

If you connected speakers only to the A (or B) SPEAKERS terminals, press SPEAKERS A (or B) to turn on only those speakers. Do not press both SPEAKERS A and B because doing so turns off all speakers even though both indicators are on.

If you connected speakers to both the A and B SPEAKERS terminals, you can:

•Press SPEAKERS A or B to turn on either pair of speakers for a two-speaker effect.

•Press SPEAKERS A and B to turn on both pairs of speakers for a four-speaker effect.

Press SPEAKERS A and/or B to turn off all speakers so you can listen privately with headphones (see “Using Headphones” on Page 11).

3.Select a program source.

To tune to a radio station, see “Direct Tuning (Remote Control Only)” on Page 10.

To listen to signals from the component connected to the TAPE MONITOR jacks, press TAPE MONITOR so TAPE MON appears.

To listen to a source other than the one connected to the TAPE MONITOR jacks, press TAPE MONITOR so TAPE MON disappears. Then press CD, PHONO, or AUX (CD, PHONO, or AUX appears).

4.Turn VOLUME clockwise to increase the volume or counterclockwise to decrease it. Or, you can use VOLUME 9 and 8on the remote control.

5.To adjust the tone, turn BASS and TREBLE toward + or – . To increase the high and low ranges of sound at low volume, press LOUDNESS. (To turn off this feature, press LOUDNESS again.)

6.To adjust the balance of sound between the left and right speakers, see “Adjusting Balance” on Page 11.

7.When you finish using the receiver, press POWER to turn it off.

USING THE SLEEP TIMER

The sleep timer lets you set the receiver to play for up to 90 minutes, then automatically turns off.

1.To set the timer, turn on the receiver then press SLEEP on the remote control. The display dims and SLEEP 90 SLEEP appears.

2.To set the sleep timer for less than 90 minutes, repeatedly press SLEEP to decrease the time by 10 minutes for each press of the button. Once you select the time, the receiver displays the program source. (SLEEP stays on the display in small letters until automatic shut-off.)

3.To briefly see the time remaining, press SLEEP once.

Stereo Receiver with Remote Control specifications

The RCA Stereo Receiver with Remote Control is a versatile and robust audio device that caters to both casual listeners and audiophiles alike. Renowned for its reliability and performance, this stereo receiver integrates advanced technologies and user-friendly features, providing an enriched listening experience.

One of the standout features of the RCA Stereo Receiver is its powerful amplifier, delivering impressive sound quality with crisp highs and deep, resonant lows. This ensures that music playback remains engaging, regardless of the genre. The receiver typically supports multiple audio formats and has the capability to connect with different types of audio sources, such as CD players, turntables, and smartphones, making it a versatile component for any audio setup.

Another prominent characteristic of the RCA Stereo Receiver is its Bluetooth connectivity. This feature allows users to stream music directly from their smartphones, tablets, or laptops, eliminating the need for cumbersome wiring. The wireless range and stability of Bluetooth technology enable seamless audio playback, enhancing user convenience and flexibility.

The RCA Stereo Receiver also includes a remote control that empowers users with added functionality and convenience. The remote allows users to adjust volume levels, switch between input sources, and manage playback without needing to approach the unit, making it an ideal choice for home entertainment systems where comfort is key.

Additionally, many RCA receivers boast an FM/AM tuner, providing access to a wide range of radio stations for live broadcasts. With presets available for easy navigation, listeners can quickly tune in to their favorite stations. The inclusion of speaker terminals allows for easy connection to various speakers, enabling users to set up their audio systems according to their preferences.

Moreover, the design of the RCA Stereo Receiver is often both elegant and compact, making it an unobtrusive addition to any room. The intuitive interface featured on the front panel ensures easy operation, appealing to users of all ages and technical skills.

In summary, the RCA Stereo Receiver with Remote Control stands out due to its powerful sound performance, Bluetooth capabilities, remote control convenience, FM/AM tuning options, and user-friendly design. This makes it an ideal choice for anyone looking to enhance their audio experience at home. Whether enjoying a quiet evening with familiar tunes or hosting a lively gathering, this receiver promises to deliver impressive sound quality and versatility.