![](/images/new-backgrounds/1280155/28015587x1.webp)
Using Phone Menus
Erase Contacts (Menu )
Allows you to erase all of your Contacts at once.
1.Press ,
,
.
2.Enter the
3.Press ![](/images/new-backgrounds/1280155/28015587xi25.webp)
![](/images/new-backgrounds/1280155/28015587xi26.webp)
![](/images/new-backgrounds/1280155/28015587xi27.webp)
Erase Contacts.
4.Select Erase all #s then press .
Reset Default (Menu )
Allows you to reset your phone to the factory default settings.
1.Press ,
,
.
2.Enter the
3.Press ![](/images/new-backgrounds/1280155/28015587xi53.webp)
![](/images/new-backgrounds/1280155/28015587xi54.webp)
![](/images/new-backgrounds/1280155/28015587xi55.webp)
Reset Default.
4.Press , select Revert then press
.
Call Setup (Menu ![](/images/new-backgrounds/1280155/28015587xi59.webp)
)
The Call Setup menu allows you to designate how the phone handles both incoming and outgoing calls.
Auto Retry (Menu )
Allows you to set the length of time the phone waits before automatically redialing a number when the attempted call fails.
1.Press ,
,
,
.
2.Select Off / Every 10 seconds / Every 30 seconds /
Every 60 seconds then press .
Answer Call (Menu )
Allows you to determine how to initiate an answered call.
1.Press ,
,
,
.
2.Select Flip Open / Any Key / SEND Only then press
.
)
Allows you to select the number of rings before the phone automatically answers a call. This feature is intended for use with hands free devices, but is an independent feature of the phone and must be manually turned on/off when connected or disconnected from the device.
1.Press ,
,
,
.
2.Select an option then press .
●Off
●After 1 ring When you have an incoming call, the phone automatically responds after 1 ring with the clamshell either opened or closed.
●After 3 rings When you have an incoming call, the phone automatically responds after 3 rings with the clamshell either opened or closed.
)
Allows you to initiate a speed dial call by pressing and holding the speed dial digit. If set to Disable, Speed Dial numbers designated in your Contacts will not function.
1.Press ,
,
,
.
2.Select Enable / Disable then press .
84
VX3200
VX3200
85