Sharp MD-MT80H operation manual Play MD

Page 43

NO SIGNAL

z Poor connection of the digital cable.

z Connect the digital cable securely.

 

z No output signal comes out from the

z If the portable CD player has a function to prevent sound

 

connected unit to playback.

skips, deactivate it.

 

z The input signal has improper sampling

z Playback with the connected unit.

 

frequency.

 

 

 

 

NOT PLAY

z You tried to play back a track that can-

z Play back another track.

 

not be played with this equipment.

 

 

 

 

PLAY MD

z You recorded on a playback-only disc.

z Replace it with a recordable disc.

 

 

 

POWER ?

z Improper power is being supplied.

z Use one of the specified power sources.

 

 

 

PROTECTED

z The write protection tab of a MiniDisc is

z Move the write protection tab back to its original posi-

 

set to the protected position.

tion.

 

z You tried to record on a playback-only disc.

z Replace it with a recordable MiniDisc.

 

 

 

SORRY

z Since a track number is currently being

z Wait for a while and try the operation again.

 

located or updated, the unit cannot ac-

 

 

cept your command.

 

 

 

 

TEMP OVER

z The temperature is too high.

z Turn off the power, and wait for a while.

 

 

 

TOC FORM (**)

z There is an error in the recording signal.

z Erase all of the tracks, and then record again.

 

 

 

TOC FULL

z There is no space left for recording

z Replace it with another recordable disc.

 

character information (track names,

 

 

disc names, etc.).

 

 

 

 

Tr. Protect

z The track has been protected from be-

z Edit the track with the device on which it was recorded.

 

ing erased.

 

 

 

 

? DISC

z A disc which contains data other than

z A disc which contains non-music data cannot be played.

 

music was played.

 

 

z There is an error in the signal recorded

z Replace it with another recorded disc.

 

on the disc.

 

Number or symbol appears in (*) position.

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

References

-Error Messages-

 

 

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Thank you for purchasing this Sharp product MD-MT80HEarphones x AccessoriesOptional Accessories Accessories/Optional AccessoriesContents „ Caution Special NotesSpecial Notes „ Warnings„ Notes Important Introduction -Names of Controls and Indicators Names of Controls and Indicators„ Main unit „ Display panel „ Important PrecautionsPrecautions Avoid using or leaving the unit in the following placesInserting a MiniDisc Inserting a MiniDiscConnections ConnectionsPreparation Digital recording RecordingBasic Operation -Recording Analogue recordingTo stop recording About the TOC To update the recorded contents of the MiniDiscRecording BasicBasic Operation -Playback PlaybackTo interrupt playback „ Volume controlTo turn off the power „ Bass control„ To locate the beginning of a track Useful Features -Advanced PlaybackAdvanced Playback „ To locate the desired portionTo return to normal playback „ To play at double speed„ Random play or repeat play To interrupt fast playbackPress the ENTER/SYNC button Useful Features -Advanced RecordingAdvanced Recording „ Playback sound-actuated recordingPress the MODE/CHRG button whilst the recording is paused „ Long-play recordingStart recording „ To start recording from the middle of a Track Advanced RecordingPress the Edit button „ Helpful tip when attaching a label„ To create your own track numbers „ Recording tracks as a single track„ Note for digital recording „ About track numbers„ About sampling rate converter Useful -Advanced„ To record from a microphone Useful Features -Recording from a MicrophoneTo write recorded contents on the MiniDisc Recording from a Microphone„ Sound-actuated recording Mic Syn- chronised recording Recording from a MicrophoneCreating track numbers manually „ Track intervalsDuring a mic manual recording During a mic synchro recordingChecking Displays FeaturesWhilst in the stop mode, press the or Useful Features -Checking DisplaysRemaining amount of battery level is shown by Battery indicator during operationInsert the rechargeable battery Battery PowerUseful Features -Battery Power „ Charging the rechargeable battery„ About charging time „ Using with the rechargeable or alkaline batteryHold Function To cancel the hold modeChanging Default Settings Changing Default SettingsTitling a MiniDisc Titling a MiniDisc„ Creating disc and track names „ To erase a charactor „ Characters symbols„ To enter a space „ Stamping titles from another MiniDisc „ To add charactersMaster MiniDisc operation Insert a Master MiniDisc „ To erase all of the tracks at once Editing a Recorded MiniDiscEditing a Recorded MiniDisc „ To erase tracks one at a time„ To combine tracks „ To divide a track„ To move a track Another System Listening through Another System„ Listening through a stereo system „ Listening through a car stereo„ Resuming auto play „ Rechargeable battery Other Features and CautionReferences -Other Features and Caution MiniDisc System Limitations MiniDisc System LimitationsError Messages Error MessagesPlay MD Troubleshooting Troubleshooting„ If trouble occurs Maintenance„ Cleaning Maintenance„ General SpecificationsPower source Battery life„ MiniDisc Recorder SpecificationsSharp Corporation

MD-MT80H specifications

The Sharp MD-MT80H is a remarkable portable mini-disc player that emerged as part of Sharp's innovative audio lineup during the early 2000s. Designed to offer high-quality sound and stylish portability, the MD-MT80H became a favorite among music enthusiasts for its reliability and versatile features.

One of the main features of the MD-MT80H is its ability to playback and record music using MiniDiscs, a medium that was known for its durability and superior sound quality compared to cassette tapes. The device boasts impressive digital recording capabilities, allowing users to capture audio with clarity. Its ability to record directly from various sources, including radio broadcasts and external devices, made it an appealing choice for those who wanted to create personalized mixes and compilations.

The Sharp MD-MT80H is equipped with the ATRAC (Adaptive Transform Acoustic Coding) technology, which compresses audio data while preserving essential sound quality. This ensures that users can store more music on a single MiniDisc without a significant loss of audio fidelity. The device supports a range of audio formats, making it versatile for different listening preferences.

The built-in DSP (Digital Signal Processing) allows users to enhance their listening experience through several EQ settings tailored for specific genres like rock, pop, or classical. This customization ensures that users can enjoy their music exactly how they like it. Moreover, the player features a backlit LCD screen that displays track information, battery life, and various settings, providing a user-friendly interface.

Battery life is another standout feature of the Sharp MD-MT80H, with impressive playtime that makes it suitable for extended listening sessions. Whether users are on a long commute or enjoying a day outdoors, the reliability of battery performance ensures uninterrupted enjoyment of music.

In terms of design, the MD-MT80H strikes a balance between functionality and aesthetics. Its compact size makes it easy to carry, while the sleek finish gives it a modern appeal. The device includes a remote control, adding to its usability, especially during active use.

The Sharp MD-MT80H showcases the brand's commitment to audio excellence, merging advanced technology with practical design. This mini-disc player is a testament to a time when portable audio was evolving, offering music lovers a chance to enjoy their favorite tunes with uncompromising quality.
Top Page Image Contents