Sagem MYV-76 manual Inserting the memory card microSD, Using the memory card

Inserting the memory card (microSD™)

1Turn the phone on to its back and slide the lock button up, then unclip the back cover.

2Remove the front cover by pushing on the two side clips.

3Insert the memory card pushing it until you hear a «click ».

Note: Take care not to mark the display screen with your fingers.

4Hold the front cover facing down. Place the keypad into that, and then clip the electronic board into place, first at the top and then down the side and at the bottom. Replace the back cover.

5Important: Slide the rear-cover lock button back down again into the lock position.

6To remove the memory card, carefully press it in to make it pop out.

1 2 3 Memory card slot

Charger and accessories connector

4 5 6

Using the memory card

The memory card is very fragile. Take care when you insert or remove the memory card.

Some memory cards must be formatted with a PC before first use with the phone.

12 Description