Configuration of WAP parameters
-Select the desired access service using the scrolling arrows then press on Modify ( 
key).
-The parameters to be entered are:
the name of the service, a user name,
a password,
the IP address of the WAP gateway: enter the IP number using the @ key (Next) then choose Secure or Non secure,
the call number,
51
•FastW@p (depending on model) which provides quicker access to the pages of Internet sites.
Reset cache: empties data stored from previous connections.
Quit: return to the phone standby screen.
The G icon enables you, by pressing the @ key, to access two display modification possibilities:
-the zoom to change the size of characters by pressing on 
successively
the access mode (digital or analog). Once all the parameters entered, you can activate the selected service.
- Confirm your choice with OK.
•Show URL which presents the current Internet address.
•Disconnect which ends the communication (allows a navigation whithout being connected).
•Linger timer enables you to set a time limit, after which the phone will disconnect automatically if you have forgotten to disconnect from a service.
- full screen display by pressing on
Connection
From the Home menu, start up connection to a service.
Once connected to a service, press on G then [Menu] to return to the local menu.
.
When connecting on the GSM network, the @ character flashes, and the cost of communications starts to clock up as soon as it stops flashing.
12. WAP Function
28/12/01, 11:36