Getting Your Phone Started
The Battery
NOTE: It is important to fully charge the battery before initial use of the phone.
The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the LCD screen.
Installing the Battery
To install the battery, insert the bottom of the battery into the opening on the back of the phone. Push the battery down until the latch clicks.
Removing the Battery
Turn the power off. Lift the release latch to detach the battery.
Release latch
Slot
Charging the Battery
The desktop charger has a charging slot that accommodates the phone with the battery attached or the battery by itself.
Warning! Use only the desktop charger provided with the phone. Using any (desktop) charger other than the one included with the VX4600 may damage your phone or battery.
1.Plug the charger into a wall outlet. The phone must be charged from a 120V AC power source.
2.Insert the phone with an installed battery, or the battery by itself, into the charging slot. The red light indicates the battery is charging and the green light indicates the battery is fully charged.
The charge time varies depending upon the battery level. The maximum charge time for a fully discharged battery is 3 hours.
Battery Charge Level
The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone, blinking the battery icon, and displaying LOW BATTERY WARNING! If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved.
|
|
|
Fully Charged | Fully Discharged |
18 | VX4600 | VX4600 | 19 |