RCA RTD250 user manual Selecting a title, Selecting a chapter Selecting subtitle language

		DVD Player
Selecting a title	2. Press the UP/DOWN key to select the audio channel you
	want, then press OK to confirm.
1. Refer to the previous page “General use” to open the		EN
title menu.

2. Enter a title number using the number keys on the remote control. Add 0 in front of single-digit title number (e.g. 9 = 09). You can also use UP/ DOWN key to change the title number.

	NOTE			NOTE
		Some discs have one title only.			This feature only works if the disc was created with
					multiple audio tracks.
Selecting a chapter
			Selecting subtitle language

1. Refer to the previous page “General use” to open the

title menu.1. Refer to the previous page “General use” to open the subtitle menu.

2.Enter a chapter number using the number keys on the remote control. Add 0 in front of single-digit chapter

number (e.g. 9 = 09). You can also use UP/ DOWN key to change the chapter number.

2. Press the UP or DOWN key to select the subtitle you want, then press OK to confirm.

NOTE
The chapter feature will not work if the disc is not
formatted with separate chapters.
Selecting audio language
1. Refer to the previous page “General use” to open the
subtitle menu, or press AUDIO on the remote control to	NoteL To exit the OSD banner, press the INFO key.
select the audio channel.

NOTE

This feature only works if the disc was created with subtitles.

21