Usingsing thethe ttwinin chargingcharging kitkit

Usingsing thethe ttwinin chargingcharging kitkit

To use the charging kit, place the charging pod on any flat surface.

1.With the radio turned off, remove the battery cover.

2.Insert only the Ni-Mh battery pack (supplied) into the radio with charging contacts facing you.

3.Replace the battery cover.

4.Plug one end of the AC power adaptor into the charging pod and then the AC adaptor into the power socket.

5.Slide the radios into the charging pod ensuring the charging contacts line up. The red lights on the charge pod glow when radios are properly inserted.

6.The batteries will be fully charged within 14 hours.

Note: When moving between hot/cold environments do not charge the battery until the battery temperature acclimates (usually about 20 minutes).

2.Select sensitivity level 1, 2 or 3 by using or . Choose - 1- If you speak loudly, or are in a noisy environment.

2- Suitable for most applications.

3- If you speak softly, or are in a quiet environment.

Note: When you connect a VOX headset, the radio will automatically be set to the last chosen VOX sensitivity level. If IVOX is active, the radio will automatically select IVOX level.

Monitorit r ffunctionti

This feature allows you to listen for weak signals on the current channel.

1.Pressing and holding allows you to monitor your channel for activity.

2.Adjust volume up or down by using or .

Note: It is good radio etiquette to monitor the channel for activity before you transmit, to ensure that you do not interrupt other users already on the channel.