
Getting Started
Installation of the Telephone Base and handset
1.Connect the mains adaptor (supplied) to the socket on the back of the base unit and to the wall mains supply.
2.Connect the telephone cord to the phone socket on the back of the base unit and into the wall phone socket.
3.Insert 2 rechargeable
4.Place the handset on the charging cradle and charge the batteries for a full 14 hours before using it for the fi rst time.
Note:
It may take some time for the cordless handset to power up, and it may get warm during initial charge. This is normal.
Tip!
It is good practice to put the cordless handset on the charging cradle when it is not in use to ensure that the handset is always fully charged.
Installation of the Photo Frame
1.Insert the supplied power adaptor into the socket on the bottom of the Photo Frame.
6
PIX2000 User Guide.indd 章节2:6