OPERATING INSTRUCTIONS
IMPORTANT: The following instructions must be read before using the adapter for the first time.
This section explains how to select the output Tips and set the output voltage / polarity and power up the Adapter.
Select the output Tips
•Select the appropriate adapter tip for your digital camera. Choose the tip with correct dimension specified in the compatibility list, or checked by direct fitting the tip direct to the equipment without connecting to the output cable.
•Before selecting the voltage setting, please refer to compatibility list to confirm the polarity
-Center Positive output or
-Center Negative output
** For Sony adapter (Tips F & G ) the polarity should be Positive.
Note: Special care should be taken at this point. Double verification is suggested to check voltage and polarity marking on the equipment.