Kyocera M2000 Use 1-Touch Dialing, Customize Keys, Place a Call on Hold, Change Hold Call Message

1. From , select .

If you have not recorded a hold message, you need to record one, such as “Please hold. I’ll answer in a minute.”

2.Record the message twice, as prompted.

3. Select	or	and one of the
following:

–to replay your message.

–to record your message

again.

–to exit.

The next time a call comes in, you can place it on hold.

Place a Call on Hold

You can place a call on hold with enabled.

If you are already on a call and you receive another call, you cannot place the incoming call on hold. With no call waiting enabled, the call

goes to		.
When a call comes in, do the following:
1.	Select	to place the
	caller on hold with your recorded hold
	message.
2.	Select	to speak to the caller on hold
	or	to hang up without speaking.
Change Hold Call Message
1.	From	, select	.

2.Record the message twice, as prompted.

3. Select to save the message or and one of the following:

–to replay your message.

–to record your message

again.

–to exit.

Use 1-Touch Dialing

The 1-Touch Dialing feature is the fastest way to call a speed dial location. To call a contact with speed dial, press and hold the speed dialing location.

If it is a two-digit location, press the first digit briefly, then press and hold the second digit.

To use 1-Touch dialing, you must enable 1-Touch dialing on your phone and have a speed dial location assigned to a contact.

From, select to turn on 1-touch dialing.

Customize Keys

You can modify the	key settings to set
up your desired shortcut.
1. From	, select	,
, or		.

2.Select your desired menu option for the targeted key shortcut.

User Guide 63