Kyocera K612b manual Network settings, Data Settings, Switching between phone lines

Network settings

Switching between phone lines

Your phone can have two service accounts, or phone lines, associated with it. Each phone line has its own phone number.

When you are using one line, you cannot receive calls from the other. It would be as if the phone were “off” for that number. Your voicemail, however, will still take messages. All contacts and settings are shared for both lines.

Note: You must first establish a second phone line with your service provider. Once established, a second phone number becomes available in the menu for selection:

1.Select Menu → Settings → Network → Set Phone Line.

2.Select one of the two lines and press .

Data Settings

Setting Com port speed

The Com Speed sets the data rate at which your phone connects to a laptop or PC, or at which it sends and receives over-the-air text messages.

1.Select Menu → Settings → Accessories → Com Port Speed.

2.Select the speed. The options are: 19.2 kbps,

115.2 kbps (default), 230.4 kbps, and Other.

Note: There may be a higher charge for making calls using high-speed data in areas where 1X service is available. Check with your service provider for details.

Setting the phone to receive data or faxes

Your phone may be able to receive certain data or faxes, depending on the system sending the information. You cannot receive voice calls while the phone is in data/fax mode. To receive data or faxes, you must connect the phone to a laptop or PC and switch the phone from voice mode to data/fax mode.

Note: To purchase a cable, call 800-349-4188 (U.S.A. only), 858-882-1410, or visit www.kyocera-wireless.com/store.

1.Connect the phone to the laptop or PC.

2.Set the Com speed.

3.Select Menu → Settings → Network → Data/Fax Calls.

4.Press to select an option:

–Voice Only allows only voice calls.

–Fax, next call or Data, next call sets the phone to fax mode or data mode for the next incoming call or the next 10 minutes.

–Fax, until off or Data, until off forces the phone into fax mode or data mode until the phone is turned off.

Note: You cannot receive voice calls while the phone is in data/fax mode.

User Guide for the Strobe Phone 51