Kyocera VMS200 manual Emergency services, Airplane mode

Send a call to voicemail

To immediately send a call to voicemail without answering it, select Ignore.

Note: Make certain that Open to answer is Disabled, or else opening the flip will answer the call. See “Open to answer” on page 43.

Check voicemail

When a voice message is received, your screen displays a notification along with a voicemail message icon at the top of your screen. The symbol flashes if the message is urgent. If you see a notification:

1.Select Voicemail to call your voicemail number.

2.Follow the system prompts to retrieve the message.

Note: To clear the screen without checking messages, select Dismiss.

If you see only the voicemail message icon:

1.Press and hold the 1 key to call your voicemail number.

2.Follow the system prompts to retrieve the message.

Emergency services

Call emergency service

You can call an emergency code, even if your phone is locked or your account is restricted. When you call, your phone enters Emergency mode. This enables the emergency service exclusive access to your phone to call you back, if necessary. To make or receive regular calls after dialing the code, you must exit this mode.

To dial an emergency code:

1.Enter your 3-digit emergency code.

2.Press the Send key.

Note: Regardless of your 3-digit emergency code (911, 111, 999, 000, etc.), your phone operates as described.

Exit emergency services

When you have completed the emergency call:

1.Select Exit.

2.Select Exit again to confirm your choice.

Note: To determine who has access to your location, see “Location” on page 44.

Airplane mode

While in an airplane, you can set your phone to Airplane mode where your phone does not emit RF signals. See “Airplane mode” on page 39.

12 Emergency services