Installation, LOW SUM function, CD Horn function

The limiter threshold can be set from -6 dB to OFF and acts on all six limiters at the same time. Still, each limiter band works independently, with the LIM-LEDs lighting up as soon as the associated limiter is activated.

+Please note that the limiters in the SUPER-X PRO are no „hard ratio“ limiters, i.e. signal peaks can surpass the adjusted threshold by as much as 6 dB. Please make sure that your system provides enough headroom.

3.6.1 Limiter setup

On condition that you are using power amps and speakers that are compatible in terms of power rating, you should drive your amps under full load (i.e. 0 dB). Use pink noise from your analyzer as a sound source, turn the limiter THRESHOLD control to maximum and press the LIMITER button. Then, gradually cut back the threshold until just a few LIM-LEDs start flashing. Now, the entire system gain is limited to 0 dB.

3.7 LOW SUM function

To produce a very loud and deep bass response, the lowest band should be summed in a mono signal, while the remaining bands remain in stereo (the human ear cannot locate the source of low frequencies). By combining all woofer cabinets in one single cluster (the closer, the better) you can optimize their efficiency. Two woofer cabinets positioned next to each other produce an SPL that is 3 dB higher than that of two cabinets placed at a certain distance. Four cabinet give you as much as 6 dB, because low-frequency sound waves feature a spherical dispersion pattern. When the cabinets are positioned separately, the sound waves they radiate interfere with each other, while cabinets placed next to each other create one common wave front (compare two stones that are thrown into the water, either separately or together).

In stereo mode, the SUPER-X PRO can be switched to mono bass mode using the LOW SUM button.

When the LOW SUM button is pressed, the low-frequency signal portions in the left and right channels are summed up. The output signal is routed to the Low output of channel 1, from where it can be used to drive, for instance, a sub-woofer cabinet.

3.8 CD HORN function

When a driver radiates into open space via a horn, its efficiency increases. Over the past few years, so- called constant-directivity horns have gained widespread popularity, as they offer the advantage of producing a very regular dispersion pattern over their frequency range; however, the higher the frequency, the lower their efficiency. To make up for this drawback, the SUPER-X PRO includes a switchable pre-EQ for CD horns that ensures a flat frequency response even before equalization is applied. This pre-EQ raises the signal gain by 3 dB at 3.5 kHz, which then increases by 6 dB/oct. up to 22.5 kHz.

4. INSTALLATION

Your SUPER-X PRO CX3400 was carefully packed in the factory and the packaging was designed to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage, which may have occurred in transit.

+If the unit is damaged, please do not return it to us, but notify your dealer and the shipping company immediately, otherwise claims for damage or replacement may not be granted. Shipping claims must be made by the consignee.

4.1 Rack mounting

The BEHRINGER SUPER-X PRO fits into one standard 19" rack unit of space (1 HU). Please allow at least an additional 4" depth for the connectors on the back panel.

Be sure that there is enough air space around the unit for cooling and please do not place the CX3400 on high-temperature devices such as power amps, etc. to avoid overheating.

18	4. INSTALLATION

CX3400 specifications

The Behringer CX3400 is a versatile and highly regarded crossover that has become a staple in professional audio setups. This unit is designed to ensure optimal sound quality by efficiently distributing frequencies to appropriate loudspeakers, making it an essential component in sound reinforcement systems, PA setups, and live performances.

One of the standout features of the CX3400 is its three-way or four-way crossover topology, which allows the user to manage sound frequencies with precision. It’s equipped with independent adjustable output controls for each of its outputs, enabling users to tailor the audio experience to fit the specific requirements of any venue or application. The ability to adjust the crossover frequency range from 50 Hz to 6 kHz makes it suitable for various configurations, whether for subwoofers or high-frequency drivers.

Another significant aspect of the CX3400 is its built-in low-pass and high-pass filters. This functionality ensures that low frequencies are directed to subwoofers while high frequencies are sent to tweeters, thus maximizing the efficiency and clarity of each speaker in the system. The filters operate at a steep 24 dB per octave slope, which aids in maintaining the integrity of sound reproduction and minimizes overlap that can lead to distortion.

In terms of technology, the CX3400 features independent audio signal processing capabilities, allowing for more refined control over the audio output. The unit includes a high-quality 24-bit A/D converter and a 24-bit D/A converter, which significantly contribute to the overall audio fidelity and dynamic range. The CX3400 also features balanced XLR inputs and outputs, ensuring that the audio signal is transmitted with minimal interference and noise.

The build quality of the Behringer CX3400 is also noteworthy. It’s designed to withstand the rigors of live performance environments, with a durable chassis that ensures reliability. The user interface is straightforward, with clear, intuitive controls that make it easy to set the desired parameters quickly.

In summary, the Behringer CX3400 crossover is a powerful tool for audio professionals, offering precise frequency distribution, advanced filtering technologies, and solid construction. Its combination of versatility, performance, and user-friendly design makes it an excellent choice for those looking to enhance their sound systems, whether in live settings or recorded applications. The CX3400 continues to be a trusted device for audio engineers, ensuring that every musical element reaches its full potential.