Ⅱ Call | Haier N60 instruction

ⅡCall

2.1 Dial call

When your service provider’s icon display the screen, to wit enter idle mode and you can make or answer a call. The signal indicator in the top left corners of the screen Indicates strength of signal being received. There are 4 bars is the most signal indicator. All mobile phones may be obstruction subject to interference, which could affect the performance of the mobile phone. So moving within small range can advance the signal strength.

Make a call in idle mode have dual mode as direct dialing and call from the phonebook. 2.1.1 Direct dialing

2.1.1.1Dialing domestic telephone

The best simple means is enter phone number (make a domestic telephone, enter area code) then press call key (or use touch-up to click the call key button) to make a call. The display screen appears ‘linking’ during dial a number, when calling there is

called time and caller’s phone number and name will appear on this screen.

Pressing right key, power/hang up (or click ‘hang-up’ button by touch-pen) to end a call. The screen will show how much time you have spent on a last call.

2.1.1.2Dial extensions of fixed telephone Some extensions of fixed telephone cannot be got through directly. So you need to get through the leader and then the extension number, if you insert ‘w’ ‘p’ between two numbers while inputting them the handset will finish dialing the leader and automatically dialing the extension number. The method of inputting ‘w’ ‘p’ is as follows: input the call time and press # key (‘w’ will be displayed on the screen at this moment). Then press long #(‘p’ will be displayed on the screen).

You can dial main and extension number directly by input ‘w’. Feature of ‘w’ is shortening processing of call. Once input ‘number’ + ’w’ (delay time) + ‘operating