Haier N60 manual When the user enable

To enable it, you just need to press OK [or click with touch-pen] to conform “Time Hint” option, and then press the left soft key [or click with touch-pen] to save it.

1.4.9 Hide Code

When this function is enabled, your cell phone number will be hidden from the phone’s screen that you are calling. To enable it, you just need to press OK [or click with touch-pen] to choose “Hide Code” option, and then press the left soft key [or click with touch-pen] to save it.

Note: This function needs the support from the network.

1.5Call Forward 1.5.1 To Home

1.5.1.1 Function Introduction:

If the user has enabled “To Home” at the present time, all the incoming calls will be forwarded to the home telephone within the set “Backtime” in the set “mode”.

1.5.1.2 Set

Enter the Option of Call Forward and

choose “To Home”; here the user can set as his wish the home phone number, “Back Time” and “Mode”. After set, press “Save” to save the set or press “Cancel” to go back to the up menu.

1.5.1.3 Effect

1.After setting “To Home” and “Back Time” ----give the key of 3 a long press, then conform to effect “To Home”.

2.If not yet set “To Home” or “Back Time”--- give the key of 3 a long press to conform, and a hint will appear that the “To Home” or “Back Time” is not yet enabled, and you

need to enter the Call Forward to pre-set.

1.5.1.4 Cancel

Enter “Call Forward” in “Call Set” and conform “ Cancel All Forwards”

1.5.2 To Company

1.5.2.1 Function Introduction
When the user enable “	To