TDK 3300 ICP manual Feature Assignment, Wireless, key Feature Telephone Shortcut & Key Sequence

SpectraLink Corporation	Setup and Administration—NetLink e340/i640 Wireless Telephone
	Mitel Networks 3300 ICP and 5220 IP Phone emulation

7.1Feature Assignment

The table below shows how the keys of the 5220 IP Phone are mapped to key sequences on the Wireless Telephone.

		Wireless
5220 key	Feature	Telephone
		Shortcut & Key
		Sequence
Trans/Conf	Transfer or conference	FCN +	1
Cancel	Cancel	FCN +	2
Message	Voicemail	FCN +	3
Redial	Redial	FCN +	4
	Mute/Unmute	FCN +	5
Superkey	Superkey	FCN +	6
Feature Key #1	Line appearance	Line +	1
Programmable Feature Key 2-14	If Feature, the feature name	FCN +	7
Programmable to either line	appears on the Feature menu		8
appearances or features.	with a shortcut key1 in the order		9
	of assignment to a feature key.		*
			0
			#
	If Line, the line extension	Line +	2
	appears on the Line		3
	Appearance list, with a line		4
	number that corresponds to the		5
	order of assignment to a		6
	feature key.		7
			8
			9
Softkey1	Phonebook (Phbk)	Softkey A
Softkey2	Programmable	Softkey B
Softkey3	Programmable	Softkey C
Hold	Hold	Softkey D

If an Open Application Interface (OAI) is operational, a function key

sequence will be assigned in the OAI configuration and will override any function sequence established in the PBX.

1Note: There may be more features programmed than there are available shortcut keys. In this situation, the feature may be activated by using the Up, Down, Select buttons on the side of the Wireless Telephone.

PN: 72-1084-02-B.doc Page 26