TDK 3300 ICP manual PN 72-1084-02-B.doc

Page 9

SpectraLink Corporation

Setup and Administration—NetLink e340/i640 Wireless Telephone

 

Mitel Networks 3300 ICP and 5220 IP Phone emulation

Access points must utilize SpectraLink Voice Priority (SVP). Contact SpectraLink, or a certified SpectraLink distributor, for information about APs that support SVP.

•Ethernet Switch – interconnects multiple network devices, including the NetLink SVP Server, the supported Mitel Networks IP telephony system, Mitel Networks IP Phones and the access points. Ethernet switches provide the highest performance networks, which can handle combined voice and data traffic, and are required when using the NetLink e340/i640 Wireless Telephones.

Although a single Ethernet switch network is recommended, the Wireless Telephones and the NetLink SVP Server can operate in larger, more complex networks, including networks with multiple Ethernet switches, routers, VLANs, and/or multiple subnets, as long as the SVP Server and access points are on the same subnet. However, in such networks, it is possible for the quality of service (QoS) features of the NetLink SVP Server to be compromised, and voice quality may suffer. Any network that consists of more than a single Ethernet switch should be thoroughly tested to ensure any quality issues are detected.

Note that the SpectraLink e340/i640 Wireless Telephones cannot “roam” from one subnet to another. If routers and multiple subnets are in use, the Wireless Telephones must only use access points attached to a single subnet, or be powered off and back on to switch to a different subnet.

•Mitel Networks IP Phone – The wired LAN desksets provided by Mitel Networks for use with the supported Mitel Networks IP telephony system.

•TFTP Server – Required in the system to distribute software to the Wireless Telephones. May be on a different subnet than the supported Mitel Networks IP telephony device(s) and APs.

PN: 72-1084-02-B.doc

Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents NetLink e340/i640 Wireless Telephone Setup and AdministrationMitel Networks 3300 ICP and 5220 IP Phone emulation Trademark InformationTable of Contents About This Document Contacting SpectraLinkIcons and Conventions SpectraLink e340/i640 Wireless Telephone Overview Quick Start Guide Mitel Networks IP telephony server architecture example System DiagramSystem Components PN 72-1084-02-B.doc Specifications NetLink e340/i640 Wireless TelephoneDisplay Admin Menu NetLink e340/i640 Wireless Telephone ConfigurationOpening the Admin Menu Entering and editing Admin Menu optionsTo Enter Press Alphanumeric String EntryESS ID Admin Menu Items Nd Level Rd Level Th LevelIP Address Restore Defaults Site Survey ModeLicense Management Security Regulatory DomainOAI On/Off Admin PWStandby menu item Nd Level Rd Level User-defined PreferencesPN 72-1084-02-B.doc Configuration Process License ManagementRequirements PN 72-1084-02-B.doc Mitel Networks VoIP Integration Factors Voice Messaging AccessCODECs Option MeaningDNS Feature Programming Feature Assignment Wireless5220 key Feature Telephone Shortcut & Key Sequence Line Appearances Feature AccessMenu Display Feature ListTesting a Wireless Telephone Site Survey Mode Certifying the NetLink e340/i640 Wireless TelephonesSite Certification Detect dBm coverageConfirm Supported Data Rates Detect Overlap or ConflictsSolving Coverage Issues Upgrading Wireless Telephones Software MaintenanceNormal Download Messages Message DescriptionTftp Download Failure or Recovery MessagesTroubleshooting Wireless Telephone Problems Access Point ProblemsConfiguration Problems Message Description Action Wireless Telephone Status MessagesMessage Description Action Do not Power Message Description Action CRC Message Description Action Index

3300 ICP specifications

The TDK 3300 ICP is a cutting-edge sensor that exemplifies the latest advancements in industrial measurement technology. Designed for precision applications, this device caters primarily to industries requiring accurate monitoring and data acquisition. Its robust construction and versatility make it an essential tool in various settings, from automotive to aerospace and beyond.

One of the central features of the TDK 3300 ICP is its ability to measure dynamic signals. The integrated sensors provide an advanced method for capturing high-frequency vibration and acceleration data. This capability is crucial for applications involving structural health monitoring and condition-based maintenance. With a wide frequency range, the TDK 3300 ICP effectively captures minute changes, making it ideal for research and development in various engineering fields.

The technology behind the TDK 3300 ICP includes a high-sensitivity piezoelectric design, which enhances its performance in detecting vibration signals. This piezoelectric element converts mechanical stress into electrical charge, allowing for precise readings in real-time. The ability to operate across a broad range of temperatures further expands its applicability in diverse environments.

Additionally, the TDK 3300 ICP showcases excellent linearity and frequency response, ensuring that the data collected is both accurate and reliable. Its low noise characteristics contribute to the integrity of the measurements, making it suitable for use in laboratories where precision is vital. The device also supports various output formats, including analog signals, making it easy to integrate into existing measurement systems.

Another notable characteristic is its compact design. The TDK 3300 ICP can be installed in confined spaces without compromising performance. This feature is particularly beneficial in industries like automotive engineering where space is often at a premium.

The TDK 3300 ICP also prioritizes user-friendliness. It is designed for straightforward installation, allowing engineers to set up the system quickly without extensive training. Its compatibility with various data acquisition systems further enhances its usability, making it a favorite among professionals seeking a reliable measurement solution.

In summary, the TDK 3300 ICP is a versatile, high-performance sensor that excels in dynamic measurement applications. With its piezoelectric technology, excellent frequency response, and compact design, it stands out as a leading choice for those in need of accurate and reliable data in industrial settings.
Top Page Image Contents