UTStarcom CDM 1080 manual Press to dial or to save, To answer a call, press any key except

C H

2

BASIC FUNCTIONS

WAIT/PAUSEFEATURE

Pauses are used for automated systems (i.e., voice mail, calling cards). Insert a pause after a phone number then enter another group of numbers. The second set of numbers is dialed automatically after the pause. This feature is useful for dialing into systems that require a code.

1To insert a wait/pause, enter a phone number

then press [OPTIONS]. Select either a Wait (“W” appears) or a Pause (“P” appears).

•Wait : Inserting a “Wait” means that the caller has to press the “Send” key to send the DTMF tone before the dialing continues.

•Pause : Inserting a “Pause” shall suspend the dialing for 2 seconds when it reaches the “Pause”.

2Press to dial or to save.

Please refer to page 30 for more details about storing a phone number.

ANSWERINGACALL

1To answer a call, press any key except , ,

,, or .

•After pressing [MENU], select “Settings & Tools” followed

by . Select among “Flip Open”, “Any Key”, and “Send Only” answering a call options. lf “Send Only” is

selected, the phone can only be answered by pressing . See page 71 for more information.

2To end the call, press .

In Auto Answer Mode, a call is automatically answered after a preset number of ring tones. See page 71 for more details.

BASIC FUNCTIONS

3-WAYCALLING

With 3-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be applied for each of the two calls.

C

1 Enter a number you wish to call then press . H

2

2Once you have established the connection, enter the second number you wish to call then

press .

3When you’re connected to the second party,

press again to begin your 3-Way call.

If one of the people you called hangs up during your call, you and the remaining caller stay connected. If you initiated the call and are the first to hang up, all three callers are disconnected.

CALLERIDFUNCTION

Identifies caller by displaying their phone number. If the caller’s name and number are already stored in your phone book, name or number will appear. The caller ID is stored in the call history.

22 23