UTStarcom CDM 1080 manual Power Connection, PCS and 1X Battery Times, Battery Life for NEW Battery

BATTERY USAGE

CBATTERY CHARGING

H

1POWER CONNECTION

1Plug the AC Charger into a standard outlet.

2Plug the other end of the AC Charger into the bottom of your phone. The battery must be installed onto the phone.

• When you charge the battery with the phone power off, you will see a charging status screen. You cannot operate the phone until it is powered on.

•The battery is not charged at the time of purchase.

•Fully charge the battery before use.

•It is more efficient to charge the battery with the handset powered off.

•The battery must be connected to the phone in order to charge it.

•Battery operating time gradually decreases over time.

•If the battery fails to perform normally, you may need to replace the battery.

BATTERY USAGE

PCS AND 1X BATTERY TIMES				C
				H
The operating time is subject to your handset usage and configuration.
				1
	Battery Capacity	DCS	PCS
	STD 1000 mAh	Up to 207 minutes	Up to 160 minutes
	EXT 1700 mAh	Up to 282 minutes	Up to 270 minutes

BATTERY LIFE (FOR NEW BATTERY)

The operating time is subject to your handset usage and configuration.

Battery Capacity	DCS	PCS
STD 1000 mAh	Up to 190 Hours	Up to 172 Hours
EXT 1700 mAh	Up to 326 Hours	Up to 293 Hours

• These times are for a new battery. Usage and Standby time may decrease over time.

•Talk time for the standard battery: about 207 minutes.

Standby time for the standard battery: about 190 hours.

12 13