UTStarcom CDM8915 manual Enter Lock Mode, WAY Calling, Call Waiting, Wait/Pause

BASIC OPERATION BASIC FUNCTIONS

■ENTER LOCK MODE

To lock the phone, press and hold .

To unlock the phone, press or [UNLOCK],

input your password, and press .

■3-WAY CALLING

With 3-Way Calling, you can talk to two people at the same time. When using this feature, normal airtime rates will apply to both of the calls.

NUMBER NUMBER

Enter a number you wish to call and press .

Once you have established the connection, enter

the second number you wish to call and press .

When you’re connected to the second party,

press again to begin your 3-Way call.

If one of the people you called hangs up during your call, you and the remaining caller stay connected.

If you initiated the call and are the first to hang up, all three callers are disconnected.

BASIC FUNCTIONS BASIC OPERATION

■CALL WAITING

Notifies you of an incoming call when you are already on a call by sounding a beep tone and displaying the caller’s phone number.

To answer another call while on the phone, press . This places the first call on hold. To switch back to the

first caller, press again.

Call Waiting is a system dependent feature. Please contact your service provider for details.

■WAIT/PAUSE

Pauses are used for automated systems (i.e., voice mail, calling cards). Insert a pause after a phone number then enter another group of numbers. The second set of numbers is dialed automatically after the pause. This feature is useful for dialing into systems that require a code.

	Select	OR
NUMBER	“P”or”T”

To insert a pause, enter a phone number then

press [MENU]. Select either a Hard Pause (“P” appears) or a Timed Pause (“T” appears).

Press to dial or [SAVE] to store.

Please refer to page 34 for more details about storing a phone number.

26 27