Sharp IM-DR410E operation manual Error Meaning Messages No Signal, Tr. Protect

Page 47

ERROR	MEANING
MESSAGES

NO SIGNAL	" Poor connection of the digital cable.
	" No output signal comes out from the
	connected unit.
	(Use the AC power for the connected
	unit.)
	" The input signal has improper sam-
	pling frequency.

PLAY MD	" You tried to record on a playback-
	only disc.

POWER?	" AC adaptor other than specified.

PROTECTED	" The write protection tab of a MiniDisc
	is set to the protected position.

SORRY	" Since a track number is currently be-
	ing located or updated, the unit can-
	not accept your command.
	(Wait a while and try the operation
	again.)

ERROR	MEANING
MESSAGES

TEMP OVER	" The temperature is too high.
	(Turn off the power, and wait a while.)

TOC FORM	" There is an error in the recording sig-
(**)	nal.
	(Erase all of the tracks, and then record
	again.)

TOC FULL	" There is no space left for recording
	character information (track names,
	disc names, etc.).

Tr. Protect	" The track has been protected from
	being erased.
	(Edit the track with the device on which
	it was recorded.)

? DISC	" A disc which contains data other
	than music was played.
	(A disc which contains nonmusic data
	cannot be played.)
	" There is an error in the signal record-
	ed on the disc.

A number or symbol appears in (*) position.

IM-DR410E

References	-Error Messages-

8

6

5

4

3

2

1

IM-DR410E TINSE0550AWZZ

47

03/7/21 IM-DR410E_6.fm

Image 47

Contents IM-DR410E Special Notes Special NotesImportant Introduction Pole plug earphone optimizes Mobile 1-bit digital amplifier FeaturesFeatures Portable MD player with Mobile 1-bit Digital amplifierContents Accessories AccessoriesMain unit Names of Controls and IndicatorsImportant Introduction -Names of Controls and Indicators Reference TOC Indicator Track Number IndicatorDisplay panel Storing the unit PrecautionsPrecautions Avoid using or leaving the unit in the following placesDo not use a nickel-cadmium battery Power Source -Using with the AC Adaptor/Alkaline BatteryClose the battery cover Close the compartment door Inserting a MiniDiscInsertinga MiniDisc Connections IM-DR410EConnectionsCheck before connecting Preparation -Hold Function To cancel the hold modeIM-DR410EHold Function Before Recording Helpful tip when attaching a labelBefore Recording About the TOCBefore recording RecordingBasic Operation -Recording To stop recording Press the MENU/ENTER buttonTo interrupt recording To interrupt playback To turn off the powerPlayback PlaybackBasic Operation -Playback Volume controlBass control To customise low and high levelsTo locate the beginning of a track Useful Features -Advanced PlaybackAdvanced Playback To locate the desired portionRandom Random play or repeat playStart recording Useful Features -Advanced RecordingAdvanced Recording Long-play recordingLP4 About the recording modeIndication Recording mode About AtracTo interrupt recording Lect REC ModePlayback sound-actuated recording 12Begin playback on the stereo systemNumbering restriction To create your own track numbersRecording tracks as a single track Useful -Advanced RecordingAbout track numbers About sampling rate converterUseful Features -Changing Default Settings Changing Default SettingsTo check the elapsed time and remain- ing time of the track IM-DR410EChecking DisplaysChecking the remaining amount of bat Tery level Useful Features -Checking DisplaysTo display the playing time of an indi- vidual track Enter button Titling a MiniDiscTitling a MiniDisc Creating disc and track namesTo enter a space Characters symbolsTo erase a character Stamping titles from another MiniDisc What is a master MiniDisc?What is a MiniDisc for stamping? To add charactersTER button Master MiniDisc operation 1 Insert a master MiniDiscTo erase all of the tracks at once Editing a Recorded MiniDiscEditing a Recorded MiniDisc To erase one track at a timeCombined, and press the button To divide a trackTo combine tracks Start playing the track to be divided into twoPlay the track to be moved, and press To move a trackAnother Listening through Another SystemResuming auto play Net MD -About Net MD What is a Net MD portable recorder?About Net MD Restrictions on audio data Restrictions on check-in and check-outMB or more System RequirementsNet MD -System Requirements Hard disk spaceClick BeatJam Setup Software InstallationInstallation of BeatJam Net MD -Software InstallationNet MD -Connecting to a PC IM-DR410EConnecting to a PCWindows Connecting to aChecking the USB driver Universal Serial Bus controllersNet MD -Transferring Data Transferring DataChecking out MiniDisc System Limitations MiniDisc System LimitationsError Messages Error MessagesTr. Protect Error Meaning Messages No SignalTroubleshooting TroubleshootingIf trouble occurs MaintenanceCleaning Troubleshooting/MaintenanceSpecifications SpecificationsOutput level Battery lifeInput sensitivity Sharp Corporation