Notes: 1. If the alarm is set to sound during a call, the clock alarm will ring after the call.
2.The clock alarm does not ring during power off, but this feature will be activated again when you turn the power on.
3.The clock alarm may not ring in Auto mode if you skip the alarm time traveling into an area with the different local time.
4.See Ringer Volume Control (F31) on page 75 to change the alarm sound volume.
5.In place of the alarm sound, you can use Vibrat- ing Alert (F8) on page 89.
Countdown Timer (F45)
This feature alerts you when the countdown timer ex- pires. The timer can be set to 1 through 99 minutes.
To Start the Countdown Timer
1. Press | F 4 GHI 5 JKL . |
2.Enter the duration, 1 to 99 minutes.
3. Press F
to start. The 
indicator will be displayed.
4.When the timer expires, the alarm will ring for one minute with animation.
5.Press any key to stop ring- ing.
Count Down F45 Timer
00min.
OK
Time is UP!
To Cancel the Countdown Timer
1. Press F
again after the timer has started.
2.“Count Down Stop?” is displayed with the remain- ing minutes to expire.
3.Scroll to “Yes” and press indicator will go out.
Count Down F45
Stop? 30min. Yes
No
OK
F
to cancel. The 
Notes: 1. If the timer expires during a call, the alarm will ring after the call.
2.When you turn the power off, the countdown timer will be canceled.
3.See Ringer Volume Control (F31) on page 75 to change the alarm sound volume.
4.In place of the alarm sound, you can use Vibrat- ing Alert (F8) on page 89.
80