Audiovox CDM-9150X Data/Fax Mode F72, TTY Mode F73, To set the Data/Fax Mode, Activating TTY Mode

Data/Fax Mode (F72)

This feature allows you to set the mode for receiving data or fax calls.

To set the Data/Fax Mode

1.	Press	F 7PQRS 2 ABC .	Data/Fax		F72
2.	Select the desired mode by		Mode
				Off
	pressing	F .
				Data
					OK

Off: No data or fax calls can be received.

Data: Can receive data.

Fax: Can receive fax.

Data Once: Data can be received for one call.

Fax Once: Fax can be received for one call.

Notes: 1. “Data Once” and “Fax Once” will be reset to “Off” automatically after receiving a data or fax once or after 10 minutes.

2.Voice calls can not be received when Data or Fax modes are set.

3.Data Service Mode (F71) is automatically set to “Circuit” when the Data/Fax Mode (F72) is set to Data or Fax.

4.When your phone is to Data or fax, you can only

use .

5.Data/Fax mode (F72) can not be set if TTY mode is active.

6.To send data or fax, the Data/Fax mode (F72) set- ting is not necessary. Service Mode (F71) must be set to “Circuit” to send data or fax.

TTY Mode (F73)

Your phone is able to operate with a TTY (Teletypewriter) device on 45.5 baud in both analog and digital modes. Connect a TTY device to the phone at the earphone- microphone jack, activate the TTY mode and you will place or receive calls in the same manner as ordinary calls. This feature is network dependent in the digital mode, and may not be available in all areas.

Activating TTY Mode

Press	F	7PQRS	3 DEF , scroll to	TTY			F73
“On” and press			F . “TTY” will	Mode
appear on the display.					On
					Off
						OK
Deactivating TTY Mode
Press	F	7PQRS	3 DEF , scroll to “Off” and press					F .

“TTY” will disappear.

88