1.Enter the telephone number (1 2 3 4 5 6 7 8 9 0).
2.Press 
.
3.Press 
.
4.After you hear the voice prompt, “ Name, please”, speak “Katie” into the microphone of the handset. You will hear “Katie” repeated from the handset again.
5.After you hear the voice prompt, “ Again”, repeat the name “Katie”. You will hear “Katie” repeated from the handset again.
6.If the registration is successful, you will hear the prompt “ Entry Completed”.
7.Your voice registration is displayed.
8.And your phonebook status is displayed. 
Notes: 1. Please register names with you normal tone of voice, and in a quiet environment.
2.For better recognition, it is recommended that very similar sounding names should not be registered.
3.The maximum length of names that phone will accept is 2 seconds.
4.The same person’s voice that was used to record the names must be used for dialing, otherwise the VAD feature may not work properly.
Reviewing the Registered Name
1.Press 
to recall the number from the phonebook.
2.Press 
and scroll to “ REPLAY”.
3.Place the phone near you ear, and press 
.
4.You will hear the registered name.
Note: Addresses with voice are marked with “ V”.
Voice Activated Dialing
Example: Dial the number by speaking “Katie”.
1.Press and hold 
.
2.Listen to the phone say “ Name, please”, then speak into the microphone “Katie”.
3.You will hear from the phone, “ Calling Katie”.
4.Katie’s number in the phonebook will be automatically dialed.
Notes: 1. If you hear “ Again” from the handset, please repeat the name.
2.If you hear “ Did you say ‘Katie’ ? ”, please answer to it “Yes” or “No”.
3.When you use this feature through car kit option, it is recommended that you speak lightly louder for better recognition.
To Register a Name to a Number Stored in Memory
1.Press
to recall the number from the phonebook.
2.Press 
, scroll to “ MODIFY” and press 
again.
3.Press 
, 
, 
4.After the screen displays “ PHONEBOOK OVERWRITE”, press 
.
5.You will have on the screen “ VOICE DATA ENTRY”.