2.You can turn this feature on/off by 
or 
.
3. Press | to set. |
Clock Adjustment (F43)
You can use your clock in AUTO or MANUAL mode. In AUTO mode, your clock synchronizes to the base time of the CDMA system and displays the local time of the area where you are, while the “ D” indicator is on. In MANUAL mode, your clock always works alone, and can be adjusted manually.
Example: To set the time to 9:15 a.m. Jul. 21, 2000 in MANUAL mode.
1. Press | . |
2.Scroll to “ MANUAL” and press 
.
3.Enter the year 
, month 
, day 
, time 
and 
for a.m. (or 
for p.m.)
4.Press 
to set.
Notes: 1. In the step 3 above, you can correct a digit by | or | , moving the cursor by | or | . |
2.The clock works internally during power off, and will display the time in the same mode when you turn the power on.
Clock Alarm (F44)
This feature alert you repeatedly at the alarm time that you programmed.
Example: To set the alarm time to 7:30 a.m.
1. | Press | . |
2. | Scroll to “ ON” and press | . |
3.Enter the alarm time 
and 
for a.m. (or 
for p.m.)
4.Press 
to set. The 
indicator will be displayed.
5.At the alarm time, the alarm will ring for one minute with animation.
6.Press any key to stop ringing.
7.The clock alarm will repeat to ring every day until you cancel the feature.
Notes: 1. If it is a time to alarm during a call, the clock alarm will ring after the call.
2. The clock alarm does not ring during power off, but this feature will be activated again when you turn the