RS2050 EN 23/1/06 3:16 PM Page 22
Radio
Recording
EN Selecting Tuner Band
1.Press SOURCE to enter Tuner mode.
2.Press BAND/ INFO to select between FM MW or LW Radio band.
Tuning to a Station
Press 
or 
to select frequencies. Press
and hold 
or 
to scan frequencies.
Using Presets
The tuner can be in either TUNE or PRESET mode.
•Press 
to toggle TUNE and PRESET
mode until “Program” lights on the display.
•Press 
or 
to access the previous or next preset station.
FM02 | Program |
91.10MHZ | |
|
|
Tips: |
|
Under PRESET mode, press | or |
can only acess the preset stations. Manaully tuning is not accessible in this mode.
Auto Preset Programming (FM only)
Press and hold the BAND/ INFO button for 2 seconds to scan stations in FM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recovered.
FM
AUTO
Manually Setting Presets
1.Press the 
button to enter TUNE mode.
2.Press 
or 
to access the desired frequency.
3.Press the PROG button once and the most recently accessed program location flashes on the display.
P:02
91.10MHZ
4.If a different program location is preferred,
press 
or 
to move to the desired preset number
5.Press PROG to store the selected frequency at that preset.
Suppressing Stereo Signal
Press FM ST to toggle between FM mono and stereo mode. (Remote Only) “STEREO” is displayed in stereo mode.
Recording to mp3 player or USB device are basically the same. You can record CD, Tuner or AUX files to the mp3 player or USB device.
Recording CD to mp3 Player
Recording Standby
1.Connect the mp3 player to the USB port, “USB Connected” will show on the display.
2.In CD stop mode, CD navigation mode or CD pause mode, press REC 
PORTABLE PLAYER.
3. Press 
to start CD playback and recording will begin. This is indicated by the REC mp3Player icon on the display.
4.Press 
to stop recording. Recording
0:20
SONG NAME
Example
(To record only selected tracks from a CD):
1.Create a CD program by following instructions under “Setting Up a Program List” on page 18.
2.In CD stop mode or navigation mode, press
REC 
PORTABLE PLAYER.
3.From normal playback mode, press PROG to enter program play mode. Playback and recording begins automatically. The Prog icon lights and REC mp3Player icon flashes on the display.
4.Press 
or REC 
PORTABLE PLAYER to stop recording.
Instant Recording
1.In CD playback mode, press REC 
PORTABLE PLAYER to start recording. REC mp3Player icon flashes on the display.
EN
Tips:
If CD playback is already started, recording will begin instantly when REC PORTABLE PLAYER is pressed.
If CD playback is stopped, playback and recording will start instantly when REC PORTABLE PLAYER is pressed.
Tips:
Recording stops automatically when
CD stops (Example: end of disc is reached).
Recording Tuner / AUX to mp3 player
Instant Recording
1.In Tuner or AUX mode, press REC 
PORTABLE PLAYER to start recording.
Recording
FM 91.10MHZ
Example
1.In radio mode, select the station to record (refer to page 15 for details).
2.Press REC 
PORTABLE PLAYER to start recording.
3.Press 
or REC 
PORTABLE PLAYER to stop recording.
Note:
The encoding bitrate for tuner, CD and AUX signal are as below:
CD / Aux : 128 kbps
Tuner : 96 kbps
15 |
|
|
| 16 |
|
|
|
|
|