RS2047EN 3/1/06 1:53 PM Page 18
Radio
EN Basic Listening
Refer to “Quick Start” for basic listening operations.
Auto Preset Programming (FM only)
Press and hold BAND for 2 seconds to scan stations in FM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recovered.
Manually Setting Presets
1.Press 
until you see “PROG” icon disappear from the display to enter tuning mode.
2.Press 
or 
to access the desired frequency.
3.Press PROG once on the remote control.
4.The most recently accessed program location will be displayed. If a different program
location is preferred, press | (navigation |
| |
keys) on the remote control (or |
| or |
|
|
| ||
|
| ||
on the main unit) to a select a desired preset number
5.Press PROG to store the selected frequency at that preset.
Using Presets
The tuner can be in either TUNE or PRESET mode. When in PRESET mode, the PROG light is on.
1.Press 
until you see “PROG” icon appear on the display to enter preset mode.
2. Press 
or 
on the main unit or 
(navigation keys) on the remote control to access the previous or next preset station. The display first shows the preset program number and after a few seconds, the frequency will be displayed. (P:22 is preset 22)
Troubleshooting Tips
Problem | Solution | Problem | Solution |
| EN | |
System will | • | Check power cord for a secure | CD sound | • Clean the disc. |
|
|
not turn |
| connection. | skips | • Check disc for warping, | ||
on | • | Unplug the unit for a moment, |
| scratches, or other damage. | ||
|
| and then plug into power |
| • Check if something is causing | ||
|
| source again. |
| the system to | vibrate. If so, | |
| • Check the outlet by plugging in |
| move the system. | |||
|
| another device. |
| • Make sure the speakers are at | ||
|
|
|
| least 3 feet away or on a | ||
No sound | • | Increase the volume setting. |
| different surface from the | ||
| • Check connection to speakers. |
| main unit. |
|
| |
| • | Check that you have selected |
|
|
|
|
|
| the appropriate function: CD, | CD button | • Switch to another function | ||
|
| Tuner. | will not | (Tuner) and then back to CD. | ||
| • Make sure mute is off. | respond, or |
|
|
| |
| • Make sure headphones are not | does not |
|
|
| |
|
| plugged in. | change |
|
|
|
|
|
| discs when |
|
|
|
Poor radio | • | Check antenna connection. | you press |
|
|
|
reception | • | Move antenna. | DISC SKIP |
|
|
|
| • | Turn off nearby electrical |
|
|
|
|
|
| appliances, such as hair dryer, | Remote | • Check that the batteries are | ||
|
| vacuum cleaner, microwave, | control | properly installed. | ||
|
| fluorescent lights. | does not | • Replace weak batteries. | ||
|
|
| work | • Check the system is plugged | ||
CD does | • | Check that CD is in the tray. |
| into power source. | ||
not play | • | Check that CD label is facing up. |
| • Point the remote directly at | ||
| • Check that PAUSE mode is not |
| the system’s front panel. | |||
|
| on. |
| • Move closer to the system. | ||
| • Check that CD function is |
| • Remove any obstacles | |||
|
| selected. |
| between the remote and the | ||
| • Use CD lens cleaner. |
| system. |
|
| |
| • | Clean the disc. |
|
|
|
|
|
|
|
|
| ||
| • | Try another CD. |
|
|
|
|
|
|
|
|
|
|
|
12 |
|
|
| 13 |
|
|
|
|
|