3Com 3C10408A manual Setting Description, WPA2 select WPA2 Tkip or WPA2 AES Network dependent

		Entering the Network Profile Settings	29
Table 8 Wireless Settings
Setting	Description
ESSID	Stands for Extended Service Set Identifier. Specifying the ESSID is
	how you make sure that you connect to your wireless network
	instead of your neighbor’s network by mistake. You can either
	manually input the New ESSID or select Site Survey to check
	all available networks. For example: Default.
Data Rate	Select a specific data rate 1 Mb/s, 2 Mb/s, 5.5 Mb/s, 6 Mb/s, 9
	Mb/s, 11 Mb/s or set as Auto.
Security	Acts as your usage permission passport. This is an effective way
	to achieve data security. Your network provider should inform
	you about the authentication types for the access point
	encryption modes. Options include:
	Open (no security)
	■	WEP (select WEP-64or WEP-128bit) (Network dependent)
		Setting WEP as Security, you can define the WEP Key Index
		from One to Four in Key Index.
		You can set the WEP key to ensure data transmission from
		wireless access points in Key.
	■	WPA-PSK(select either WPA-PSK TKIP, which
		automatically changes the keys at a preset time interval,

making it much more difficult for hackers to find and exploit them, or WPA-PSK AES as advanced encryption standard) (Network dependent).

You can set the key to ensure data transmission from wireless access points in Key.

■ WPA2-PSK (select WPA2-PSK TKIP or WPA2-PSK AES ) (Network dependent).

You can set key to ensure data transmission from wireless access points in Key.

■ WPA (select WPA TKIP or WPA AES ) (Network dependent).

■ WPA2 (select WPA2 TKIP or WPA2 AES ) (Network dependent).

You can set the key to EAP (MD5, GTC, MSCHAPv2, LEAP,

TLS or TTLS), Identity, User Name, Password, CA Cert.,

User Cert. and Private.

6Edit your IP Settings as necessary. Table 9 lists the available options.