RS22162 S
CAUTION: TO REDUCE THE RISK OF ELECTRICSHOCK,DONOTREMOVECOVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
T h e l i g h t n i n g f l a s h w i t h arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner’s manual.
ON PLACEMENT
•Do not use the unit in places which are extremely hot ,cold ,dusty, or humid.
•Place the unit on a flat and even surface.
•Do not restrict the air flow of the unit by placing it in a place with poor air flow, by cover- ing it with a cloth, or by placing it on a carpet.
ON SAFETY
•Before operating, make sure that the rated voltage of the AC adapter matches your local voltage.
•When you are not going to use the unit for a long period of time, disconnect the AC adapter.
ON CONDENSATION
• When left in a heated room where it is warm and damp, water droplets or condensation |
| may form inside the CD player. |
• | When there is condensation inside the unit, the unit may not function normally. |
• | Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room |
1 | Read these instructions. |
2 | Keep these instructions. |
3 | Heed all warnings. |
4 | Follow all instructions. |
5 | Do not use this apparatus near water. |
6 | Clean only with a dry cloth. |
7 | Do not block any of the ventilation openings. Install in accordance with the |
| manufacturer’s instructions. |
8 | Do not install near any heat sources such as radiators, heat registers, stoves, or |
| other apparatus (including amplifiers) that produce heat. |
9 | Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized |
| plug has two blades with one wider than the other. A grounding type plug has two |
| blades and a third grounding prong. The wide blade or the third prong are provided |
It's important to read this instruction prior to using your new product for the first time.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The symbol for Class 
(Double lnsulation)
This product contains a low power laser device.
Warnings
•The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
•The AC adapter is used as disconnect device and it should remain readily operable during intended used. In order to disconnect the apparatus from the mains completely, the AC adapter should be disconnected from the mains socket outlet completely.
•Minimum 10 cm (4 inches) distances around the apparatus for sufficient ventilation.
•Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
•Do not restrict the airflow of the unit by placing it in a place with poor airflow, by covering it with a cloth, or by placing it on carpeting.
•No naked flame sources such as lighted candles should be placed on the apparatus.
-2 -
and allow the unit to dry before use. |
FCC INFORMATION
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an AC power outlet that is on a circuit different from the one the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Warnings: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
- 3 -
| for your safety. If the provided plug does not fit into your AC power outlet, consult an |
| electrician for replacement of the obsolete outlet. |
10 | Protect the AC power cord from being walked on or pinched particularly at plugs, |
| convenience receptacles, and the point where they exit from the apparatus. |
11 | Only use attachments/accessories specified by the manufacturer. |
12 | Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, |
| or sold with the apparatus. When a cart is used, use caution when moving the cart/ |
| apparatus combination to avoid injury from tip-over. |
Portable Cart Warning
13Unplug this apparatus during lightning storms or when unused for long periods of time.
14Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the AC power cord or plug is damaged, liquid has spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-4 -
SYSTEM CONNECTIONS
1.CONNECTING THE SPEAKERS
Connect the wires to the speaker terminals.
Note: Connecting speakers other than the speakers supplied with the unit, may damage the unit.
2.USING THE AC ADAPTER
Before use, make sure that the rated voltage of your AC adapter matches your local voltage. Make sure both speakers are connected correctly before plugging the AC adapter cord into the AC power outlet.
To AC Power outlet
AC adapter
SYSTEM CONNECTIONS
3.CONNECTING WITH OTHER OPTIONAL EQUIPMENT
Listening to the audio signals from the external equipment
1)Connect the AC adapter to the AC power outlet.
2) | Slide the FUNCTION selector | |
| to the AUX position. The | |
| AUX IN indicator lights up. | |
3) | Turn on your audio equipment | |
| and play the external source. | Audio |
Equipment
Built-in
AUX cable
Storing the Built-in AUX cable
1)Place the built-in AUX cable inside the tray.
2)Gently push the tray door up until it is closed.
LOCATION OF CONTROLS
RADIO OPERATION
1. Slide the FUNCTION selector to | 2. Slide the BAND selector to desired |
TUNER. | band (AM/FM). |
The POWER indicator lights up. | | | | | | | |
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | |
3. Tune into a station. | 4. Adjust the volume level. |
FOR BETTER RECEPTION
SKIP/SEARCH 
buttons
REPEAT button
PHONES jack
DISC SKIP button
STOP button
PLAY/PAUSE button