Supplied components
If any components should be missing, please contact your dealer.
□ Left and right stand rods (x1 each) □ Mounting bars (x2) □ Shelf board bar (x1) □ Mounting brackets (x2) | ||
□ Reinforcement angle (x1) □ Shelf board (x1) □ Fixed angles (x2) □ Casters (x4) □ Spring washers (x4) | ||
□ Spacer angles (x4) □ Screws (M4x10) (x26) □ Screws (M6x14) (x28) □ Grip fixing brackets (x2) | ||
□ | □ | □ |
(8)Attach the removed grips (x4) to the grip fixing brackets (x2) with the screws (x8) removed in Step (7).
•Attach the grips so they are oriented toward the front of the monitor.
(9)Attach the grip fixing brackets (x2) with the screws (x8) removed in Step (6).
•The position for attaching the grip fixing brackets varies depending on the position of the mounting brackets.
Mounting bracket | Mounting bracket |
positions [B], [C] | positions [A], [D] |
(9)
(9)
Clamps (x6) Spanner (x1) Operation Manual (this manual) |
Usage precautions
• When moving the stand, follow the precautions below. | • After moving the stand, make sure that the casters and |
- Turn off the power of the monitor and any connected | stand rods have not become loose. |
devices, and disconnect the power cord and external | • When using the stand, orient the front casters so they face |
cables. | forward and the rear casters so they face backward, and |
- Unlock the casters. | lock them. |
- This work requires 2 or more people. | • When transporting (by truck, etc.), remove the monitor. |
- Do not place any items on the shelf board. | - For removal and reassembly after transport, consult your |
Unlock | dealer. The customer should not attempt this work. |
| • The load capacity of the shelf board is 15 kg (33.1 lbs.). |
Installation procedure (for SHARP dealers and service engineers)
Caution
•Our company will bear no responsibility for accidents or injuries caused by improper installation or mishandling.
•Installation requires at least 4 people. To prevent damage, remove watches and jewelry such as rings.
•Connect the cables to the monitor before installing the monitor.
•Take care not to catch or pinch the cables.
•Tighten all screws firmly with a screwdriver.
•Keep the grip fixing brackets and grips in a safe place, as they are necessary for installing and removing the monitor.
1.Prepare the monitor.
(1)Spread a soft thick cloth (such as a blanket) on a stable level surface on which the entire monitor can be placed, and place the monitor on it with the LCD panel facing down.
(2) Move the attachment position of the lower left and right handles (x1 each) one level up on the monitor.
• For details, refer to the manual for the monitor.
(3) If the tray is to be installed, attach the tray mounting fittings to the monitor.
• For details, refer to the manual for the monitor.
•Do not install the tray yet.
(4)Secure the mounting brackets (x2) with the screws (M6x14) (x4).
• Adjust the height of the monitor using the attachment |
| Screw (M6x14) |
| |
positions [A], [B], [C] and [D] as shown. | (4) | Mounting bracket | (4) | |
* Be sure to attach the mounting brackets in the indicated | [A] | [A] | ||
| ||||
positions. If attached in different positions, the stand or |
|
|
|
2. Assemble the stand. |
|
|
|
|
|
|
(1) Attach the casters (x4) to the left and right | Stand rod | Reinforcement |
|
| Stand rod |
|
stand rods and lock the casters. |
| angle |
|
|
|
|
|
|
|
|
|
| |
• Insert the spring washers (x4) between |
|
| Mounting | (4) Screw | ||
the rods and casters, and tighten firmly | Front |
| ||||
with the spanner (supplied). |
|
| bars |
|
| (M6x14) |
|
| (8) |
|
|
| |
(2) Provisionally attach the screws (M6x14) |
|
|
|
|
| |
|
|
|
| (5) |
| |
(x2) to the shelf board bar, and hang the |
|
|
|
|
| |
|
|
|
|
|
| |
bar on the left and right stand rods. |
|
|
|
|
|
|
* Hang the bar so that the side with |
|
|
|
|
|
|
3 screw holes in the center faces upward. |
| Shelf board bar |
|
|
| |
(3) Provisionally attach the shelf board bar |
| (1) | (2) | Screw | ||
with the remaining screws (M6x14) (x6). |
|
|
| |||
|
|
|
|
| (M6x14) | |
(4) Provisionally attach the screws (M6x14) | (1) |
|
|
| (1) |
|
(x2) to the upper mounting bar, and hang it |
|
|
|
| ||
Spring |
| Spring | (3) |
| ||
on the left and right stand rods. |
|
|
| |||
|
|
|
| |||
* Hang the bar so that the side with screw | (1) | washers |
| washers |
|
|
|
|
|
|
| ||
holes faces upward. | Caster |
|
|
|
|
|
(5) Provisionally attach the upper mounting |
|
|
|
|
|
|
bar to the left and right stand rods with the screws (M6x14) (x6).
(6)Provisionally attach the lower mounting bar to the left and right stand rods in the same way as the upper mounting bar.
(7)Firmly tighten the screws (x24) attached in Steps (2) to (6) to secure the shelf board bar and the mounting bars.
(8)Attach the reinforcement angle with the screws (M4x10) (x9).
(9)Attach the shelf board.
•The shelf board can be attached on either the left or right Screw (M4x10)Back
side. | (11) | Fixed |
| (10) | |
angle | (10) | ||||
Provisionally attach the screws (M4x10) (x2) to the shelf |
| ||||
|
| (9) | |||
board bar, and hang the shelf board on it. |
|
|
| ||
|
|
|
| ||
Securely tighten the screws provisionally tightened in |
|
| (10) | (10) | |
and secure the remaining 3 positions with the screws |
|
|
| ||
|
|
|
| ||
(M4x10) (x3). |
|
|
| Screw | |
(10) Lift the monitor by the grips on the grip fixing brackets, and |
|
|
| ||
|
|
| (M4x10) | ||
hang the monitor on the mounting bars. |
|
|
| ||
|
|
|
| ||
* Take care not to pinch your hand. |
|
|
|
|
•4 or more people are required to lift the monitor. Lift the monitor straight up without tilting it.
(11)Secure the mounting brackets and mounting bars with the fixed angles (x2) and screws (M4x10) (x4).
(12)Remove the grip fixing brackets.
(13)Secure the spacer angles (x4) with the screws (M4x10) (x8).
•Make sure that the spacer angles touch the back of the monitor before securing them.
•The orientation and position of the spacer angles vary depending on the height of the monitor.
| monitor may fall or topple. | [B] | [B] | |
(5) | Place the monitor back in the shipping box and stand it upright. | [C] | [C] | |
(6) | Remove the left and right handles (x2 each) from the monitor. | |||
[D] | [D] | |||
| • For details, refer to the manual for the monitor. | |||
(7) | Remove the grips from the handles. (x4) |
|
|
(7) |
| Position [A] | Position [B] | Front |
| Front |
| |
|
|
| |
Mounting |
|
|
|
bar | Front |
| Front |
|
|
Mounting |
|
bar |
|
Shelf |
|
board bar | Spacer angle |
Position [C]
Front
Front
Position [D]
Front
Front
Grip |
(14)If the tray is to be attached, attach the tray onto the tray mounting fittings.
•For details, refer to the manual for the monitor.
– 2 – | – 3 – |
