Apple XL-DH259P Listening to a CD or MP3/WMA disc, Listening to the iPod or iPhone

Listening to the iPod or iPhone (continued)

QNavigating the iPod and iPhone menus

1Press the MENU button to view the menu on iPod or iPhone unit. Press it again to go back to previous menu.

2Use the PRESET ( or ) button to select an item on the menu and then press ENTER button.

Note:

When navigating the iPod or iPhone menu with remote control, do not operate any of the buttons on the iPod or iPhone unit. The volume level is adjusted by pressing the VOL (+ or -) button on the main unit or the remote control. Adjusting the volume on the iPod and iPhone units give no effect.

iPod and iPhone operations:

The operations described below depend on the generation iPod and iPhone you are using.

System on operation:

When the main unit is powered on, the iPod and iPhone units will automatically power on when docked in the unit.

System off (stand-by operation):

When the main unit is turned to stand-by mode, the docked iPod and iPhone unit will automatically turn to stand-by mode.

QWatching videos on a TV connected to iPod or iPhone

1Press the DISPLAY (TV OUT) button for more than 2 seconds. “TV DISP” will appear on display.

2Press the ENTER button to start playback.

Notes:

OIf the TV Out setting is already turned on at video menu, the video is automatically displayed on the TV screen when ENTER key is pressed.

OTo return to watching video on iPod or iPhone screen, press the MENU button to enter video menu. Then press the DISPLAY (TV OUT) button for more than 2 seconds until “iPod DISP” appears.

ODuring iPod or iPhone video playback, pressing the DISPLAY (TV OUT) button will not toggle video out display between iPod and TV.

iPod or iPhone playback detection function:

Once the play button on the iPod or iPhone unit is pressed, the main unit will automatically change to iPod function overriding the previous function selected.

Caution:

OUnplug all accessories for the iPod or iPhone before inserting it into the iPod dock.

OStop button () at main unit is invalid during iPod function.

QVarious iPod functions

Function	Main	Remote	Operation
	unit	control
Play			Press in the pause
			mode.
Pause			Press in the playback
			mode.
Track			Press in the playback
up/down			or pause mode. If you
	____		press the button in the
			pause mode, press the
			button to start the
			desired track.
Fast			Press and hold down in
forward/	____		the playback mode.
reverse			Release the button to
			resume playback.
Display			iPod back light ON.
	____		Press for more than
			2 seconds to toggle
			the video out display
			between iPod or TV.
Repeat	____		Press to toggle repeat
			mode.
Shuffle	____		Press and hold down to
			toggle shuffle mode.
iPod	____		Press to view the iPod
Menu			menu during iPod
			function.
iPod			Press to confirm the
Enter	____		selection.
iPod			Press to select the iPod
Cursor	____		menu.
Up/Down

Listening to a CD or MP3/WMA disc

QDisc playback

1Press the ON/STAND-BY button to turn the power on.

2Press the CD button on the remote control or FUNCTION button repeatedly on the main unit to select CD function.

3Press the OPEN/CLOSE button to open the disc tray.

4Place the disc on the disc tray, label side up.

5Press the OPEN/CLOSE button to close the disc tray.

6Press the (CD/USB ) button to start playback. After the last track is played, the unit will stop automatically.

Notes for CD or MP3/WMA disc:

OWhen the end of the last track is reached during fast forward, “END” will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode (only for CD).

ORewritable multi-session discs with unfinished writing, can still be played.

E-7