Samsung GH68-60614A owner manual Nothing displays, Your party cannot reach you

Page 44

Nothing displays

◆Check that the battery has been charged and installed correctly.

◆Check that the phone has been turned on (PWR key pressed for more than one second).

You have entered a phone number, but the phone is not dialing it.

◆Have you pressed the SEND button?

◆Is the cellular phone service currently available (SVC displayed)?

◆Are you accessing the right cellular network (if the phone is programmed for dual network use)?

Your party cannot reach you.

◆Is your phone turned on (PWR key pressed for more than one second)?

◆Are you accessing the right cellular network (if the phone is programmed for dual network use)?

Your party cannot hear you speaking.

◆Have you turned off the microphone (MUTE displayed)?

◆Are you holding the phone close enough to your mouth? The microphone is located at the bottom of the phone.

The phone starts beeping, and flashes on the screen.

◆The battery is insufficiently charged. Replace the battery, and recharge it fully until the lamp on the charger turns green.

The audio quality of the call is poor.

◆Check the signal strength indicator ( ) on the screen; the number of bars indicates the signal strength from weak ( ) to

strong ( ).

◆Try extending the antenna, moving the phone slightly, or moving closer to a window if you are in a building.

No number is dialed when you recall a memory location.

◆Check that the numbers have been stored correctly by using the memory scan feature. (See page 32.)

◆Re-store them in the memory, if necessary.

If the above guidelines do not enable you to solve the problem, make a note of:

◆The model and serial numbers of your phone

◆Your warranty details

◆A clear description of the problem

Then contact your local dealer or a SAMSUNG Authorized Service Center.

Miscell aneous

86

87	Miscell aneous

Image 44

Contents Cdma Portable Cellular Telephone SCH-210 Press/Push ① = Step number Safety PrecautionsCheck the laws and regulations Contents Front View of the Phone Rear View of the PhoneInstalling the Battery Removing the BatteryDisplay Icons Displays the dialed numbers and the current statusTo Use the Normal Charger DTC Charging the BatteryMore on Batteries Checking the Battery Charge Level Battery charge level displays in at the leftTurning the Phone On and Off Corner of the screenWhen you use the phone Extending the AntennaMaking a Call For best performance, fully extend the antennaTo Prepend a Number Prepending a Stored NumberReceiving Calls Press Menu while you are on the phone Press 1 on the keypad Voice VolumeMute Returning Incoming Calls Auto-dialing Last Number RedialRedialing Outgoing Calls Erasing Numbers in Redial Memory Tracking TimePress 3 to select Erase Logs To eraseErasing Cumulative Air Time Phone’s Internal Phone BookStoring Numbers in Memory Other Ways to Store Numbers PressEntering Names in Memory Correcting a Name or NumberDialing Confidential Numbers One-Touch DialingTwo-Touch Dialing Searching for Numbers in Memory By NameDial the number Exit the functionBy Partial Phone Number By Memory Location NumberTo display Press Make the callTo Erase a Specific Number by Memory Location Number Erasing a Number in MemoryTo Erase a Specific Number by Name To...Press Adjusting Ringer VolumesTo Erase All Numbers in Memory Choosing the Alert Type Choosing the Alert ToneSetting Warning Beeps Setting Up BacklightYou can set the phone to sound warning beeps that indicate ChooseYou can check your own phone number Displaying Your Own Phone NumberDisplaying Your Phone’s Version Silent Scratchpad Sending Your Own Phone NumberTo Turn Off the Keytone To Turn On the KeytoneKey Lock Analog Force CallDual Tone Multi-Frequency Dtmf Dialing Using MemoryUsing Pause To Turn On the Call Reminder Alert Remind call setupCall Reminder Alert Setting or Changing Current Time To Turn Off the Call Reminder AlertFeatures Short modeCustomizing Your Phone Answer callsSetting the Features Locking the PhoneEnter your lock code. For details Setting Restriction ModesRestricting the Use of the Phone Changing the Lock Code Press Menu Press 0 on the keypad Enter the current lock codeTo erase an emergency number Calling Emergency NumberTo store an emergency number Choosing NAM NAM selectionSystem Selection System ResetSystem Mode Setting the Phone to Send PIN To use the featureOr † To...ChooseSetting Up Three-Way Calling Call WaitingCaller ID Display To Respond to the Call WaitingMessage Service Call ForwardingTo Activate Call Forwarding Finding Out You Have a MessageReading Text Messages Contact your service provider to activate this featureRetrieving Messages in Voice mail Choosing Alert Type for Message Receiving CallbackErasing All Messages Cleaning Your Cellular Phone Battery Safety PrecautionsKeep the batteries out of children’s reach AccessoriesHands-free Car Kit HF Troubleshooting BatteryCigarette Lighter Charger CLC Travel ChargerNothing displays Your party cannot reach youYour party cannot hear you speaking Phone starts beeping, and flashes on the screenYou have tried to access Memory restricted modePhone is out of service Phone number is notPHONE’S Internal Phone Book Call reminder alert Turn on Menu Tree UNRESTRICT/RESTRICT ‘98/1 Rev GH68-60614A