![](/images/new-backgrounds/1289798/2897989x1.webp)
Display Icons
Displays the dialed numbers and the current status
Blinks while the phone selects a channel and lights up when the line connects.
NOSVC: No service area
SVC: Service area
Lights up when the phone is out of the home area
CDMA: Digital mode
Indicates the signal strength by the number of bars
Displays the battery charge level by the number of blocks
Indicates incoming or pending messages
Reminds you that you have set the Alert type to VIBRATOR
Reminds you that you have set the Alert type to LAMP and will not hear the phone ring with incoming calls
Reminds you that you have set the
Reserved Call Alert
Installing the Battery
1.Align the charged battery by resting it on the back of the phone with the battery terminals pointing downward. Place the top of the battery about 1/2 inch from the top edge of the battery opening.
2.Slide the battery upward until it clicks firmly into position.
Your phone is now ready to use.
Removing the Battery
To remove the battery, press the battery release button while sliding the battery out of position.
Prepara tion
8 | 9 |