Smooth Fitness SMT9.2AB, SMT9.2P owner manual Power Requirements

Page 9

Power Requirements

IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN

RESULT IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELEC- TRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PROD- UCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT IF IT WILL NOT FIT THE OUTLET. HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.

This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges, and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of treadmill damage, always use a surge protector (not included) with your treadmill.

Surge protectors can be purchased at most hardware stores. The manufacturer recommends a sin- gle outlet surge protector with UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with UL suppressed voltage rating of 400V or less and an electrical rating of 120VAC, 15 amps.

This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric current should the treadmill malfunction. This treadmill comes with an electrical cord with an equipment-grounding conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in the drawing below.

9

Image 9
Contents SMT9.2P SMT9.2AB Table of Contents IMPORTANT! Please Read Product Name DefinitionsModel SMT9.2P SMT9.2AB Model Specification SheetSafety Precautions and Tips Important Safety InformationBefore You Start Exercise Guidelines Warm Up ExercisesAssembly Instructions Minor Assembly RequiredSee Figure Power Requirements Console Functions and Descriptions Console Layout Speed BAR Emergency RED SafetyTime Window Center Brickyard Distance Window Incline BAR Incline WindowTo pause your workout, press Pause Program and Operating InstructionsRolling Hills Program Speed Intervals ProgramCustomizing Pre-Set Programs Program ModeSpeed Incline Program ProfilesWalking Belt is Slipping During USE Diagram Belt Adjustment and TensionMaintenance Instructions Deck LubricationTo Apply Lubricant to the Walking Board Treadmill will not start Troubleshooting GuideParts & Exploded View SMT9.2 Consult Your Physician Before Using this Product