Sears 35-1215B owner manual Socket

Page 10

ASSEMBLY INSTRUCTIONS

STEP 7

Slide the SEAT(25) onto the CENTER BEAM(1). Insert the STOPPER BOLT(20) through the CENTER BEAM(1) and lock in position by screwing on the STOPPER(19). Also, please verify that the other STOPPER BOLT(20) and STOPPER(19) have already been assembled at the factory. If it has not been pre-assembled, then please assemble at this time. Press the CENTER BEAM CAP(28) into the back end of the CENTER BEAM(1).

STEP 8

Pry the METER(30) from the CONSOLE(31). Attach the CONSOLE(31) to the CENTER BEAM(1) with

ROUND HEAD SCREWS(M4x10mm)(48).

STEP 9

Install an AA battery into the METER(30), one battery included. See page 12 for detailed battery installation instructions. Run the connection wire of the METER(30) through the square hole on the CONSOLE(31). Place the METER(30) back into the CONSOLE(31). Plug the connection wire of the METER(30) into the socket located at the front end of the CENTER BEAM(1).

SOCKET

(Assembled at the factory)

10

Image 10
Contents This Product is Distributed Exclusively by Stamina ProductsTable of Contents Safety InstructionsCall Us First Before YOU Begin Orbital RowerEquipment WARNING, Caution & Notice Labels Hardware Identification Chart MillimetersAssembly Instructions StepAssembly Instructions Assembly Instructions Socket Load Adjustment Operational InstructionsFunction Button HOW to Install and Replace BatteryFunctions Maintenance StorageConditioning Guidelines WARM-UP and COOL-DOWN Product Parts Drawing Parts List PART# Part Name QTYPart Name QTY Limited Warranty WarrantyPage Page To Register Your Product To Contact Customer ServiceTo Order Parts