Weslo WLTL27080 user manual 2ÓÐ3Ó

Page 13

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjust- ment bolt clockwise, and the right bolt counterclock- wise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

b. If the walking belt has shifted to the right, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjust- ment bolt counterclockwise, and the right bolt clock- wise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

c. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjust- ment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

PROBLEM: The walking belt slows when walked on

a

b

a

SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be permanently damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts coun- terclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt cen- tered. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

2ÓÐ3Ó

 

Rear Roller

Adjustment Bolts

c. If the walking belt still slows when walked on, please call our toll-free Customer Service Department.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model No. WLTL27080 Serial No QUESTIONS?Customer HOT Line Important Precautions Table of ContentsPage Back Before YOU BeginFront Right SideYour own phillips screwdriver Adjustable wrench Scissors AssemblyScrews are tight, but do not overtighten them HOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Insert the key fully into the power switch Diagram of the ConsoleReset the console and start the walking belt Step by Step Console OperationTIME/DISTANCE HOW to Change the Incline of the TreadmillCALORIES/FAT CAL HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use Maintenance and TROUBLE-SHOOTING2ÓÐ3Ó Exercise Intensity Conditioning GuidelinesWorkout Guidelines Suggested Stretches Qty Description Part LISTÑModel No. WLTL27080Exploded DRAWINGÑModel No. WLTL27080 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT
Top Page Image Contents